CONTROLS AND DISPLAY
Option Switch 1 - This switch can be system operator programmed to control a specific function (see page 35).
Antenna Jack - Connection point for the antenna.
Accessory Connector - When the protective cover is removed, this connector can be used for connecting optional accessories.
Battery Release Button (Not shown) - This button is located on the bottom end of the transceiver, and it is pressed to release the battery so that it can slide downward and be removed from the radio.
Option PTT Switch 2 Switch
Option
Switch 3
Side Controls
Option Switch 2 - This switch can be system operator programmed to control a specific function (see page 35).
PTT
Option Switch 3 - This switch can be system operator programmed to control a specific function (see page 35).
12