EFJohnson 7243 LTR-Net Portable UHF LTR Features, Conventional Features, Standard Group Calls

Page 47

LTR FEATURES

LTR FEATURES

NOTE: Other LTR features are described starting on page 45.

Standard Group Calls

Standard group calls are between two mobiles or between a mobile and a control station. To place these calls in the LTR or LTR-Net mode, simply select the desired group and press the PTT switch (no number is dialed). The procedure for placing and receiving these calls is described starting on page 27.

Telephone Calls

Telephone calls allow you to place and receive calls over the public telephone system using your transceiver. LTR and LTR-Net telephone calls are described starting on page 30.

CONVENTIONAL FEATURES

Squelch Adjust

This function sets the squelch level used for conventional calls.

Since the squelch level for LTR-Net and LTR calls is preset and cannot be changed, this adjustment needs to be made only if you make conventional calls (refer to page 23 for more information on operating modes). Proceed as follows:

1.Select a conventional system and a group that is not busy. If the selected channel is programmed for Call Guard squelch, press the Monitor option switch (if programmed) to enable monitoring (see page 49).

2.Press FCN SQL to select the squelch adjust mode. The currently selected squelch level is then indicated by “SQ xxx” in the display.

48

Image 47

Contents Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference GuideGeneral Features FeaturesTop Panel Controls Controls and DisplaySide Controls Display Busy UIDControls and Display FCN Scan Front Panel KeysSYS RCL Dial Standard Mode A/D Standard Mode SYS Basic Operation Power-Up SequenceSetting Volume Levels System/Group Display ModeSystem and Group Select Numeric Display ModeTransceiver Lock Keypad DisableLTR-Net, LTR, and Conventional Operation Low Battery IndicationOption Switches Basic Operation Bank Select General FeaturesCall Indicator Receive-Only Groups Home System/Group SelectProceed Clear-To-Talk Tone General Time-Out TimerStandard Group Calls Tone SelectLTR-Net and LTR Operation Placing a Standard Group CallReceiving a Standard Group Call Conventional OperationPlacing Telephone Calls Telephone CallsReceiving a Telephone Call Placing LTR-Net Auxiliary Calls LTR-NET Auxiliary CallsLandside-Originate Telephone Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu ModeIntroduction Menu ModeMenu Mode Flowchart Introduction Dial ModeSelecting Dial Mode Storing Numbers in Memory Dialing a NumberSending the Number Recalling Numbers From Memory Exiting Dial ModePlacing Calls Without Selecting Dial Mode System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeSystem and Group Scanning Priority Calls LTR-NET and LTR FeaturesTransmit Inhibit Busy Queuing LTR-NET FeaturesLTR-Net Standard Calls LTR-Net Special CallsRoaming Standard Group Calls LTR FeaturesConventional Features Squelch AdjustMonitoring Before Transmitting Transmit Disable On Busy Monitor Mode SelectedCall Guard Squelch Talk-AroundSupervisory Tones MiscellaneousLTR-Net Special Call Tones Display Messages LTR Telephone Call TonesMiscellaneous Bank SEL Bank select Menu Mode MessagesAlpha Numeric Rechargeable Battery PackMiscellaneous Battery Charger Operation Operation At Extended Range Charger IndicatorsSpeaking Into Microphone Licensing Transceiver ServiceIndex Busy 14 Call 13 Index 002-7200-600