EFJohnson 7243 LTR-Net Portable UHF manual General Features, Bank Select, Call Indicator

Page 24

GENERAL FEATURES

GENERAL FEATURES

Bank Select

A bank is a collection of selectable systems that have been set up for a specific application. For example, one bank could be programmed for operation in Minneapolis and another for operation in Milwaukee. Up to sixteen banks can be programmed, and each bank is identified by a unique alpha tag.

Banks are selected by the BANK SEL menu parameter. In the menu mode select the “BANK SEL” parameter and then the desired bank (refer to page 35 for more menu mode information). If this menu parameter is not available, banks are not selectable.

Call Indicator

The call indicator is “C” in the upper part of the display (see

following illustration). The purpose of this indication is to show that a call was received while you were away from the radio. Individual groups can be programmed for this feature and it then turns on when a call is received on one of those groups.

Call

CIndicator

This indicator is turned off by pressing any button or cycling power. If scanning and the “Last Received” configuration is programmed (see “Transmitting In The Scan Mode” on page 43), the system and group of the last call are displayed. Otherwise, the currently selected system/group is displayed.

25

Image 24

Contents Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Quick Reference Guide BusyFeatures General FeaturesControls and Display Top Panel ControlsSide Controls Busy UID DisplayControls and Display Front Panel Keys FCN ScanSYS RCL Dial Standard Mode A/D Standard Mode SYS Power-Up Sequence Setting Volume LevelsSystem/Group Display Mode Basic OperationNumeric Display Mode System and Group SelectKeypad Disable Transceiver LockLow Battery Indication Option SwitchesLTR-Net, LTR, and Conventional Operation Basic Operation General Features Call IndicatorBank Select Home System/Group Select Proceed Clear-To-Talk ToneReceive-Only Groups Time-Out Timer Standard Group CallsTone Select GeneralPlacing a Standard Group Call LTR-Net and LTR OperationConventional Operation Receiving a Standard Group CallTelephone Calls Placing Telephone CallsReceiving a Telephone Call LTR-NET Auxiliary Calls Landside-Originate Telephone CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Option Switches and Menu Mode Menu Mode and Option Switch FunctionsMenu Mode IntroductionMenu Mode Flowchart Dial Mode Selecting Dial ModeIntroduction Dialing a Number Sending the NumberStoring Numbers in Memory Exiting Dial Mode Placing Calls Without Selecting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue TimersSystem and Group Scanning LTR-NET and LTR Features Transmit InhibitPriority Calls LTR-NET Features LTR-Net Standard CallsLTR-Net Special Calls Busy QueuingRoaming LTR Features Conventional FeaturesSquelch Adjust Standard Group CallsMonitoring Before Transmitting Monitor Mode Selected Transmit Disable On BusyTalk-Around Call Guard SquelchMiscellaneous Supervisory TonesLTR-Net Special Call Tones LTR Telephone Call Tones Display MessagesMiscellaneous Menu Mode Messages Bank SEL Bank selectRechargeable Battery Pack Alpha NumericMiscellaneous Battery Charger Operation Charger Indicators Speaking Into MicrophoneOperation At Extended Range Transceiver Service IndexLicensing Busy 14 Call 13 Index 002-7200-600