EFJohnson 7243 LTR-Net Portable UHF manual Numeric Display Mode, System and Group Select

Page 20

BASIC OPERATION

modes, press FCN STR. Turning power off does not change the selected mode. These modes operate as follows:

Numeric Mode - The system and group numbers are displayed as “Sxx Gxx” and the group alpha tag is not displayed. For example, System 1 and Group 2 are displayed as follows. When only group scanning is occurring, the group number is replaced by dashes and the system number continues to be displayed (see page 40).

Numeric Display Mode

Alpha Tag Mode - The group alpha tag is displayed and the system and group numbers are not displayed. For example, the “CAR 220” system is displayed as follows. There is no special group scan indication when only group scanning is occurring.

Alpha Tag Display Mode

System and Group Select

Systems and groups are selected by the keypad SYS and GRP keys and one or more other keys as follows:

•To increase the selected system, press SYS and then . Likewise, to increase the selected group, press GRP . Holding the key down causes the function to repeat. After the highest system or group is selected, a tone sounds and wrap-around to the lowest system or group occurs.

•To decrease the selected system, press SYS and then . Likewise, to decrease the selected group, press GRP . Holding the key down causes the function to repeat. After the lowest system or group is

21

Image 20

Contents Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Quick Reference Guide BusyFeatures General FeaturesControls and Display Top Panel ControlsSide Controls Busy UID DisplayControls and Display Front Panel Keys FCN ScanSYS RCL Dial Standard Mode A/D Standard Mode SYS Power-Up Sequence Setting Volume LevelsSystem/Group Display Mode Basic OperationNumeric Display Mode System and Group SelectKeypad Disable Transceiver LockLTR-Net, LTR, and Conventional Operation Low Battery IndicationOption Switches Basic Operation Bank Select General FeaturesCall Indicator Receive-Only Groups Home System/Group SelectProceed Clear-To-Talk Tone Time-Out Timer Standard Group CallsTone Select GeneralPlacing a Standard Group Call LTR-Net and LTR OperationConventional Operation Receiving a Standard Group CallTelephone Calls Placing Telephone CallsReceiving a Telephone Call Placing LTR-Net Auxiliary Calls LTR-NET Auxiliary CallsLandside-Originate Telephone Calls Receiving Auxiliary Calls Option Switches and Menu Mode Menu Mode and Option Switch FunctionsMenu Mode IntroductionMenu Mode Flowchart Introduction Dial ModeSelecting Dial Mode Storing Numbers in Memory Dialing a NumberSending the Number Recalling Numbers From Memory Exiting Dial ModePlacing Calls Without Selecting Dial Mode System and Group Scanning System and Group Scanning Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue TimersSystem and Group Scanning Priority Calls LTR-NET and LTR FeaturesTransmit Inhibit LTR-NET Features LTR-Net Standard CallsLTR-Net Special Calls Busy QueuingRoaming LTR Features Conventional FeaturesSquelch Adjust Standard Group CallsMonitoring Before Transmitting Monitor Mode Selected Transmit Disable On BusyTalk-Around Call Guard SquelchMiscellaneous Supervisory TonesLTR-Net Special Call Tones LTR Telephone Call Tones Display MessagesMiscellaneous Menu Mode Messages Bank SEL Bank selectRechargeable Battery Pack Alpha NumericMiscellaneous Battery Charger Operation Operation At Extended Range Charger IndicatorsSpeaking Into Microphone Licensing Transceiver ServiceIndex Busy 14 Call 13 Index 002-7200-600