EFJohnson 7243 LTR-Net Portable UHF manual A/D Standard Mode

Page 17

CONTROLS AND DISPLAY

Dial Mode

6 - Dials the “6” digit.

7(S.A/D) Standard Mode

FCN S.A/D (System Add/Delete) - Changes the scan list status of the currently displayed system. The system is in the scan list and

scanned normally if “ S ” is displayed when not scanning.

7 - Pressing this key with the PTT switch pressed transmits the “7” digit.

Dial Mode

7 - Dials the “7” digit.

8(SEND)

Standard Mode

8 - Pressing this key with the PTT switch pressed transmits the “8” digit.

Dial Mode

8 - Dials the “8” digit.

FCN SEND - Automatically accesses the radio system and trans- mits the number in the display.

9(G.A/D) Standard Mode

FCN G.A/D (Group Add/Delete) - Changes the scan list status of the currently displayed group. The group is in the scan list and scanned normally if “ G” is displayed when not scanning.

9 - Pressing this key with the PTT switch pressed transmits the “9” digit.

Dial Mode

9 - Dials the “9” digit.

0 (STR) Standard Mode

FCN STR - Changes between the numeric and alpha display modes.

0 - Pressing this key with the PTT switch pressed transmits the “0” digit.

18

Image 17

Contents Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference GuideGeneral Features FeaturesTop Panel Controls Controls and DisplaySide Controls Display Busy UIDControls and Display FCN Scan Front Panel KeysSYS RCL Dial Standard Mode A/D Standard Mode SYS Setting Volume Levels Power-Up SequenceSystem/Group Display Mode Basic OperationSystem and Group Select Numeric Display ModeTransceiver Lock Keypad DisableLTR-Net, LTR, and Conventional Operation Low Battery IndicationOption Switches Basic Operation Bank Select General FeaturesCall Indicator Receive-Only Groups Home System/Group SelectProceed Clear-To-Talk Tone Standard Group Calls Time-Out TimerTone Select GeneralLTR-Net and LTR Operation Placing a Standard Group CallReceiving a Standard Group Call Conventional OperationPlacing Telephone Calls Telephone CallsReceiving a Telephone Call Placing LTR-Net Auxiliary Calls LTR-NET Auxiliary CallsLandside-Originate Telephone Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu ModeIntroduction Menu ModeMenu Mode Flowchart Introduction Dial ModeSelecting Dial Mode Storing Numbers in Memory Dialing a NumberSending the Number Recalling Numbers From Memory Exiting Dial ModePlacing Calls Without Selecting Dial Mode System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeSystem and Group Scanning Priority Calls LTR-NET and LTR FeaturesTransmit Inhibit LTR-Net Standard Calls LTR-NET FeaturesLTR-Net Special Calls Busy QueuingRoaming Conventional Features LTR FeaturesSquelch Adjust Standard Group CallsMonitoring Before Transmitting Transmit Disable On Busy Monitor Mode SelectedCall Guard Squelch Talk-AroundSupervisory Tones MiscellaneousLTR-Net Special Call Tones Display Messages LTR Telephone Call TonesMiscellaneous Bank SEL Bank select Menu Mode MessagesAlpha Numeric Rechargeable Battery PackMiscellaneous Battery Charger Operation Operation At Extended Range Charger IndicatorsSpeaking Into Microphone Licensing Transceiver ServiceIndex Busy 14 Call 13 Index 002-7200-600