3.Select the dial mode by pressing FCN DIAL. This mode is indicated when the handset portion of the telephone icon is displayed.
4.Dial the desired number which specifies the mobile or group of mobiles being called. If it has been previously stored, this number can be recalled from memory by pressing FCN RCL and the location number
5.To send the number, briefly press the PTT switch and then when the dial tones sounds, press FCN SND. Another tone then sounds to indicate that the call was accepted by the system. The call then proceeds as follows. If this tone does not sound, an unauthorized or incorrect number may have been dialed. If all system resources are busy, the call is placed in a queue as described in “Busy Queuing” on page 46.
Unique ID Call - Ringing is heard to indicate that the other transceiver is being rung. If there is no answer, ringing automatically stops after several rings and the call is terminated. When the other party answers, respond as with a standard call.
Directed Group Call - A second tone sounds to indicate that the path is complete and speaking should begin. No ringing occurs.
6.When the call is complete, it should be terminated the same as described in step 6 on page 31. Three beeps indicate that the call has been terminated.
Receiving Auxiliary Calls
To receive a Unique ID call, all that is required is that an
33