EFJohnson 7243 LTR-Net Portable UHF manual Miscellaneous, Supervisory Tones

Page 51

MISCELLANEOUS

MISCELLANEOUS

Supervisory Tones

The following tones are heard at various times when operating this transceiver. Some or all of these tones may be disabled by the TONES menu parameter or programming (see “Tone Select” on page 27).

Busy Tone

This tone is similar to the standard telephone busy tone, and it indi- cates that the radio system is currently busy. The display also indicates “BUSY” while this tone is sounding. Repeated access attempts are made while the PTT switch is pressed with this tone sounding. Therefore, it is not necessary to release the PTT switch to access the system. This tone sounds only with LTR-Net and LTR calls.

Intercept Tone

This is a siren-like tone (alternating high and low tones) which indicates the following no access and error conditions:

No Access - If this tone sounds shortly after pressing the PTT switch and “NO ACESS” is displayed, the radio system could not be accessed, perhaps because of an out-of-range condition (see “Opera- tion At Extended Range” on page 60). Once this tone sounds, no more access attempts are made until the PTT switch is released and then pressed again. This condition is indicated only with LTR-Net and LTR calls.

Time-Out Timer - If this tone sounds after the transmitter has been keyed for an extended period and “TIMEOUT” is displayed, the transmitter has been disabled by the Time-Out Timer feature (see page 27).

Transmit Inhibit - If this tone sounds as soon as the PTT switch is pressed with an LTR-Net or LTR system selected and “TX INHIB”

52

Image 51
Contents Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference GuideGeneral Features FeaturesTop Panel Controls Controls and DisplaySide Controls Display Busy UIDControls and Display FCN Scan Front Panel KeysSYS RCL Dial Standard Mode A/D Standard Mode SYS Basic Operation Power-Up SequenceSetting Volume Levels System/Group Display ModeSystem and Group Select Numeric Display ModeTransceiver Lock Keypad DisableLow Battery Indication Option SwitchesLTR-Net, LTR, and Conventional Operation Basic Operation General Features Call IndicatorBank Select Home System/Group Select Proceed Clear-To-Talk ToneReceive-Only Groups General Time-Out TimerStandard Group Calls Tone SelectLTR-Net and LTR Operation Placing a Standard Group CallReceiving a Standard Group Call Conventional OperationPlacing Telephone Calls Telephone CallsReceiving a Telephone Call LTR-NET Auxiliary Calls Landside-Originate Telephone CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu ModeIntroduction Menu ModeMenu Mode Flowchart Dial Mode Selecting Dial ModeIntroduction Dialing a Number Sending the NumberStoring Numbers in Memory Exiting Dial Mode Placing Calls Without Selecting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeSystem and Group Scanning LTR-NET and LTR Features Transmit InhibitPriority Calls Busy Queuing LTR-NET FeaturesLTR-Net Standard Calls LTR-Net Special CallsRoaming Standard Group Calls LTR FeaturesConventional Features Squelch AdjustMonitoring Before Transmitting Transmit Disable On Busy Monitor Mode SelectedCall Guard Squelch Talk-AroundSupervisory Tones MiscellaneousLTR-Net Special Call Tones Display Messages LTR Telephone Call TonesMiscellaneous Bank SEL Bank select Menu Mode MessagesAlpha Numeric Rechargeable Battery PackMiscellaneous Battery Charger Operation Charger Indicators Speaking Into MicrophoneOperation At Extended Range Transceiver Service IndexLicensing Busy 14 Call 13 Index 002-7200-600