EFJohnson 7243 LTR-Net Portable UHF manual Dialing a Number, Sending the Number

Page 37

DIAL MODE

Dialing a Number

Enter the desired number by pressing the 0-9, #, and keys. Other dialing functions are as follows:

•Only the last 8 digits dialed are displayed. To momentarily display the upper 8 digits, press FCN .

•To erase the last digit, press the CLR key (hold it down to repeat). To erase the entire number, press FCN CLR.

•To enter a pause, press FCN (each pause equals one character).

Sending the Number

Briefly press the PTT switch to access the radio system. Then to send the number in the display, press FCN SND. The keypad remains active while in a conversation to allow additional numbers to be dialed. Simply press the PTT switch and dial the number. The number in the display does not change when a number is dialed in this manner. If you want to save the number in the display (see following information), make sure you do so before the dial mode is exited.

Storing Numbers in Memory

Up to ten 16-digit numbers can be stored in memory and later recalled. Proceed as follows to store a number:

1.Enter the number as described in the preceding “Dialing a Number” section.

2.To store the number, press FCN STR and the memory location from 0-9.

3.If there is already a number in the selected location, it is replaced by the new number. To clear a memory location, simply store a blank display.

38

Image 37

Contents Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference GuideGeneral Features FeaturesTop Panel Controls Controls and DisplaySide Controls Display Busy UIDControls and Display FCN Scan Front Panel KeysSYS RCL Dial Standard Mode A/D Standard Mode SYS Setting Volume Levels Power-Up SequenceSystem/Group Display Mode Basic OperationSystem and Group Select Numeric Display ModeTransceiver Lock Keypad DisableOption Switches Low Battery IndicationLTR-Net, LTR, and Conventional Operation Basic Operation Call Indicator General FeaturesBank Select Proceed Clear-To-Talk Tone Home System/Group SelectReceive-Only Groups Standard Group Calls Time-Out TimerTone Select GeneralLTR-Net and LTR Operation Placing a Standard Group CallReceiving a Standard Group Call Conventional OperationPlacing Telephone Calls Telephone CallsReceiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu ModeIntroduction Menu ModeMenu Mode Flowchart Selecting Dial Mode Dial ModeIntroduction Sending the Number Dialing a NumberStoring Numbers in Memory Placing Calls Without Selecting Dial Mode Exiting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeSystem and Group Scanning Transmit Inhibit LTR-NET and LTR FeaturesPriority Calls LTR-Net Standard Calls LTR-NET FeaturesLTR-Net Special Calls Busy QueuingRoaming Conventional Features LTR FeaturesSquelch Adjust Standard Group CallsMonitoring Before Transmitting Transmit Disable On Busy Monitor Mode SelectedCall Guard Squelch Talk-AroundSupervisory Tones MiscellaneousLTR-Net Special Call Tones Display Messages LTR Telephone Call TonesMiscellaneous Bank SEL Bank select Menu Mode MessagesAlpha Numeric Rechargeable Battery PackMiscellaneous Battery Charger Operation Speaking Into Microphone Charger IndicatorsOperation At Extended Range Index Transceiver ServiceLicensing Busy 14 Call 13 Index 002-7200-600