Kenwood VC-H1 instruction manual One or more of the following statements may be applicable

Page 2

NOTICES TO THE USER

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer for technical assistance.

Image 2
Contents VC-H1 One or more of the following statements may be applicable Accessory Part Number Quantity FeaturesSupplied Accessories Thank YOUContents Instruction What to Do PrecautionsConventions Followed in this Manual Press KEY1+KEY2Orientation Connector DescriptionsGetting Acquainted Insert four AA LR6 alkaline batteries Installing Alkaline BatteriesPreparation Connecting the AC Adapter Attaching the StrapREMOVING/ Reinstalling the Camera Unit Connection with a Handy TransceiverQuick USE Slide the PWR switch upward to turn the power on Switching Power ON/OFFSelecting a Sstv Mode To turn the power OFF, slide the PWR switch downwardPress MR to store the captured image in a memory channel Capturing ImagesPress S to activate both the camera and LCD monitor To confirm the stored images, press MRPress TX to transmit the image Transmitting ImagesPress MR to recall an image to be transmitted Receiving Images Tell the other party that you are ready to receive an imagePress S+HOLD+ Power on Memory ResetBattery Saver Auxiliary FunctionsPress TX or RX to select the first digit Press MR+HOLD+ Power on to switch the function on or OFFSuperimposing a Call Sign Press Hold to complete the entryAF Muting Press TX+RX+ Power onAuto Transmit Display Contrast ChangeService Note MaintenanceService CleaningTroubleshooting Problem Probable Cause Corrective ActionVC-H1 Data Port PIN Functions Connection Diagram with TS-570 or TS-870Appendix Pin No Pin Name FunctionPin Name Function Computer ControlComputer COM Port Pin Functions 9-Pin Port Call sign superimposition Sstv mode switchInquiry of current Sstv mode Message superimpositionSpecifications Ntsc