Kenwood VC-H1 Connection with a Handy Transceiver, REMOVING/ Reinstalling the Camera Unit

Page 9

CONNECTION WITH A HANDY TRANSCEIVER

Use the provided cable to connect the VC-H1 with a handy transceiver.

Note: The VC-H1 functions as a speaker microphone only when connected with a handy transceiver. You need not switch ON the VC-H1.

1Confirm that the power switches of both the VC-H1 and transceiver are OFF.

2Connect the appropriate end of the provided cable to the DATA port of the VC-H1.

• To remove the cable from the VC-H1, pull the cable

connector downward while pushing its tabs from both sides.

To remove

3Connect the other end of the cable to the speaker/ microphone jacks on your handy transceiver.

Note: The compatible handy transceivers are TH-26, TH-46, TH-27, TH-47, TH-28, TH-48, TH-22, TH-42, TH-77, TH-78, TH-79, and TH-G71. An optional PG-4T cable is available for connecting with a TM-255, TM-455, TM-733, TM-V7, or TM-G707 transceiver. To make a cable for connecting with a TS-570 or TS-870 transceiver, you may obtain an optional connector kit (E59-0407-08) which mates with the VC-H1 DATA port. For the above options, contact your authorized KENWOOD dealer, customer service, or service center.

REMOVING/ REINSTALLING THE CAMERA UNIT

Note: Turn OFF the power to the VC-H1 before removing or reinstalling the camera unit.

To remove the camera unit, first turn it so that it crosses at right angles with the main unit.

or

To reinstall the camera unit, first position the port on the camera unit over the port on the main unit so that the two units cross at right angles.

Note: The camera unit has a structure that allows the plug assembly to be slightly moved. This is aimed at absorbing stress to be caused when the camera unit is turned.

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VC-H1 One or more of the following statements may be applicable Supplied Accessories FeaturesAccessory Part Number Quantity Thank YOUContents Conventions Followed in this Manual PrecautionsInstruction What to Do Press KEY1+KEY2Connector Descriptions Getting AcquaintedOrientation Installing Alkaline Batteries PreparationInsert four AA LR6 alkaline batteries Attaching the Strap Connecting the AC AdapterConnection with a Handy Transceiver REMOVING/ Reinstalling the Camera UnitQuick USE Selecting a Sstv Mode Switching Power ON/OFFSlide the PWR switch upward to turn the power on To turn the power OFF, slide the PWR switch downwardPress S to activate both the camera and LCD monitor Capturing ImagesPress MR to store the captured image in a memory channel To confirm the stored images, press MRTransmitting Images Press MR to recall an image to be transmittedPress TX to transmit the image Tell the other party that you are ready to receive an image Receiving ImagesBattery Saver Memory ResetPress S+HOLD+ Power on Auxiliary FunctionsSuperimposing a Call Sign Press MR+HOLD+ Power on to switch the function on or OFFPress TX or RX to select the first digit Press Hold to complete the entryAuto Transmit Press TX+RX+ Power onAF Muting Display Contrast ChangeService MaintenanceService Note CleaningProblem Probable Cause Corrective Action TroubleshootingAppendix Connection Diagram with TS-570 or TS-870VC-H1 Data Port PIN Functions Pin No Pin Name FunctionComputer Control Computer COM Port Pin Functions 9-Pin PortPin Name Function Inquiry of current Sstv mode Sstv mode switchCall sign superimposition Message superimpositionNtsc Specifications
Top Page Image Contents