Kenwood VC-H1 instruction manual Getting Acquainted, Orientation, Connector Descriptions

Page 6

GETTING ACQUAINTED

ORIENTATION

CCD camera

COM jack

LCD

monitor Video output jack

DC IN jack

Speaker/ microphone

DATA port

Video input jack

CONNECTOR DESCRIPTIONS

qVideo input jack

This jack accepts a 3.5 mm (1/8") diameter,

3-conductor plug. You may connect a digital camera

or 8 mm VTR to take in images (acceptable video signals: 75 Ω, 1 VP-P(140 IRE) ±15%, NTSC).

			1 When connecting a device
			other than the provided
			other than the provided
Ground		No Connection 1	camera unit, using this
	Video		conductor could cause the
	signal		device to be damaged.

wCOM jack

Connect a personal computer in which a dedicated program has been installed. For details, contact your authorized KENWOOD dealer, customer service, or service center.

eVideo output jack

Connect an external monitor, if you prefer. This jack accepts a 2.5 mm (1/10") diameter, 2-conductor plug.

Ground Video signal

rDC IN jack

Connect the provided AC adapter to use power supplied from an AC outlet.

tDATA port

Connect your transceiver. See page 5.

Image 6

Contents VC-H1 One or more of the following statements may be applicable Accessory Part Number Quantity FeaturesSupplied Accessories Thank YOUContents Instruction What to Do PrecautionsConventions Followed in this Manual Press KEY1+KEY2Connector Descriptions Getting AcquaintedOrientation Installing Alkaline Batteries PreparationInsert four AA LR6 alkaline batteries Connecting the AC Adapter Attaching the StrapREMOVING/ Reinstalling the Camera Unit Connection with a Handy TransceiverQuick USE Slide the PWR switch upward to turn the power on Switching Power ON/OFFSelecting a Sstv Mode To turn the power OFF, slide the PWR switch downwardPress MR to store the captured image in a memory channel Capturing ImagesPress S to activate both the camera and LCD monitor To confirm the stored images, press MRTransmitting Images Press MR to recall an image to be transmittedPress TX to transmit the image Receiving Images Tell the other party that you are ready to receive an imagePress S+HOLD+ Power on Memory ResetBattery Saver Auxiliary FunctionsPress TX or RX to select the first digit Press MR+HOLD+ Power on to switch the function on or OFFSuperimposing a Call Sign Press Hold to complete the entryAF Muting Press TX+RX+ Power onAuto Transmit Display Contrast ChangeService Note MaintenanceService CleaningTroubleshooting Problem Probable Cause Corrective ActionVC-H1 Data Port PIN Functions Connection Diagram with TS-570 or TS-870Appendix Pin No Pin Name FunctionComputer Control Computer COM Port Pin Functions 9-Pin PortPin Name Function Call sign superimposition Sstv mode switchInquiry of current Sstv mode Message superimpositionSpecifications Ntsc