Cobra Electronics MR HH415LI VP EU owner manual Backlit LCD Screen and Product Features

Page 4

Introduction

Backlit LCD Screen and Product Features

Backlit LCD (Liquid Crystal Display) Screen

Transmit and Receive Icons

 

 

Low/Medium/High Power Icons

 

 

Frequency

 

Call Tone Icon

 

Memory Channel Icon

Band Icon

 

 

 

Memory Channel

Active Channel

 

Automatic Transponder

Numbers

 

 

 

Identification System Icon

Tri-Watch Icon

 

Simplex Operation Icon

 

 

Button Lock Icon

 

Battery Power Icon

 

 

Scan Icon

Roger Beep Icon

Key Tone Icon

UIC Active Channel Map Icons

Product Features

 

Power Settings

 

 

Tri-Watch

Selectable power settings produce

 

Use to monitor three (3) channels

1, 3 or 5 watts of output power for near

at once — Channel 16 and two (2)

or distant calling.

 

programmable channels.

International/Canada/USA Channels

Allows operation on any of the three (3) different channel maps established for these areas.

Submersible to JIS7 Standards

Waterproof to 1 m [3.3 ft] of water for 30 minutes.

Button/Key Lock

Prevents accidental setting changes when button lock is set.

Channel Scan/Memory Scan

Use to scan through unlimited channels or memory locations to find conversations in progress.

Instant Channel 16

Provides instant access to priority Channel 16.

Lithium-Ion Rechargeable

Battery Pack

Provides extended operating time compared to alkaline batteries with no memory effect.

220V/12V Rapid Charger Included

Use to charge battery pack in the radio, at home, in a car or in a boat.

Locking Desktop Charger

Holds the radio or battery in place while charging. Vertical or horizontal mounting.

Call Tones (Selectable)

10 selectable call tones.

A3 English

Image 4
Contents MR HH415LI VP EU Our Thanks to You and Customer Assistance Radio Controls and Indicators LCDBacklit LCD Screen and Product Features Product Features Speaker/Mic JackTable of Contents Important Safety Information Important Safety InformationGeneral Precautions Important Safety Information Recommendations for Marine Communication Recommendations for Marine CommunicationLicensing Information Station LicenseCanadian or U.S.A. Station License Radio Call SignVHF Marine Radio Procedures Voice Calling Voice CallingVessel Corsair calling the vessel Vagabond Radiotelephone Calls Radiotelephone CallsEmergency Messages and Distress Procedure Emergency Messages and Distress ProcedureMarine Emergency Signals If You Hear a Distress CallMarine Distress Procedure Tell where you areSay End message by sayingFor Example VHF Marine Channel Assignments Public Correspondence marine operator Port OperationsNavigational Digital Selective CallingUSA International Distress, Safety and Calling 03A Government Only156.900 23A Government Only 21A U.S. Government Only Canada Coastguard Only61A U.S. Government Only Canada Coastguard Only Channel 64A U.S. Government Only Canada Commercial Fishing Digital Selective Calling Voice communications not allowedLimits 81A U.S. Government Only Environmental Protection Operations Included in this Package Included in this PackageAntenna Installation Antenna, Wrist Strap and Belt ClipWrist Strap Belt ClipBatteries and Charger Installing the Battery PackBatteries and Charger Initial Charge To Remove Battery Pack from Radio Alkaline BatteriesMaintaining the Battery Charge Power/Volume/Squelch Controls Power On/Off Control Volume ControlGetting Started Common Radio FunctionsSquelch Control Talk ButtonTRI-WATCH Button Call/Enter/Setup Button Preset Button Backlight/Key Lock ButtonTo Display the Backlight Momentarily Key LockScan Button To Toggle Between H-M-L Power Modes High/Medium/Low H-M-L Power ButtonCall /Enter/Setup Button To Set Personal Default Settings Setup Mode Programming Setup Mode ProgrammingInternational/Canada/USA Channel Maps To Set Channel Map Operating AreaVibrAlert Mode To set VibrAlertCall Tone Mode To Set Call ToneRoger Beep Mode Key Tone ModeTo Set Roger Beep On or Off To Set Key Tone On or OffAtis ID Programming Atis ID ProgrammingTo Set the Atis ID Number Atis ID Programming Marine Standby and Receive Rx Mode Standby/Receive and TransmitStandby/Receive Transmit Transmit Tx ModeTo Transmit a Message Channel 16 Mode To Switch to ChannelAdvanced Operation Advanced OperationTri-Watch Mode Tri-Watch Setup To Program or Edit the Tri-Watch ChannelsUsing Tri-Watch Tri-Watch Scan Mode Tri-Watchmemory channelsMemory Location Mode To Program Memory LocationsTo Recall a Stored Memory Location To Exit Memory Location ModeTo Erase Stored Memory Locations Channel Scan Mode To Enter Channel ScanMemory Location Scan Mode To Enter Memory Location Scan From Marine Standby mode, press the MEM/ESC buttonUsing Rewind-Say-Again Rewind-Say-Again FeatureExample Using Rewind-Say-Again to Record Audio Transmission Maintenance TroubleshootingPress Backlight Key Lock buttonSpecifications SpecificationsEnglish Accessories AccessoriesLapel Speaker/Microphone Declaration of Conformity and CE Marking