Advanced Operation
Tri-Watch Mode
Tri-Watchmode gives you one (1) button access to scan a total of three (3) channels of most importance to you. Channel 16 is preprogrammed and will always be one (1) of the scanned locations. Two (2) other channels of your choice can be stored in the radio. These channels can be edited and/or recalled during future engagements of Tri-Watchmode.
NOTE
The radio must be squelched for Tri-Watchmode to function. See page 31 for Squelch procedure.
Tri-Watch Setup
To Program or Edit the Tri-Watch Channels:
1.Press and hold the TRI-WATCHbutton for two (2) seconds to activate Tri-Watch Setup mode. The TRI and MEM icons on the display will turn On.
NOTE
The main channel number will flash to indicate channel position. If there is no input activity for 15 seconds, the radio will sound two (2) beeps and return to Marine Standby mode.
2.Press Channel Up/Down button to select the desired Tri-Watchchannel.
3.Press and release TRI-WATCHbutton or Call/Enter/Setup button to confirm entry.
4.Repeat steps 2 and 3 to program the remaining additional Tri-Watchmemory channel.
5.After programming both Tri-Watchmemory channels the radio will immediately engage Tri-Watchmode. (See page 46 for further details.)
Nothing Comes Close to a Cobra® 45
