Cobra Electronics MR HH415LI VP EU owner manual Atis ID Programming, To Set the Atis ID Number

Operating Your Radio

ATIS ID Programming

ATIS ID Programming

•

The Automatic Transmission Identification System (ATIS) feature of this Cobra radio is used to identify marine vessels in some inland waterways of European countries that require ATIS transmission. An ATIS ID number is required to operate the ATIS feature. The ATIS ID number is derived from your vessels call sign. You must enter your ATIS ID number into this radio before the ATIS system will become functional.

Please consult your local dealer for questions about local ATIS requirements.

With this feature activated the vessels ATIS ID number is transmitted after every push of the Talk button.

Channel Down and SCAN Buttons

ATIS ID Start Screen

To Set the ATIS ID Number:

NOTE

The ATIS ID is a 10 digit number that will always begin with the number “9.” You will be asked to enter only the last nine digits. The first digit, “9”, has been automatically entered for you.

1.With the radio turned Off; press and hold the Channel Down and SCAN buttons and simultaneously power On the radio.

2.The LCD will display and flash the ATIS icon. A dash (-), to the right of the digit 9, will be flashing for the next entry.

NOTICE

Remember, you only have one (1) attempt to set the ATIS ID number. Once this number has been entered, only your Cobra distributor with PC software can reset the ATIS ID number. You can also return the radio to Cobra for reprogramming.

40 English