Operating Your Radio
MEM/ESC Button
MEM Icon 
Memory Location Number
Channel Up/Down Button
Advanced Operation
To Recall a Stored Memory Location:
1.Press the MEM/ESC button. The MEM icon will be turned On.
2.Press the Channel Up/Down button to select the memory location. If a memory location has been programmed, its associated channel will display on the LCD. Your radio is now in Marine Standby mode on the selected memory location.
To Exit Memory Location Mode:
Press the MEM/ESC button to return the radio to Marine Standby mode. The last channel used in Marine Standby mode will now be displayed on the LCD and the MEM icon will disappear.
To Erase Stored Memory Locations:
1.Press and hold the MEM/ESC button for two (2) seconds. The memory location number will start flashing and the MEM icon will be turned On.
2.Use the Channel Up/Down button to advance to the memory location you want to erase.
3.Press the MEM/ESC button to select the memory location. The memory channel number will stop flashing and the channel number will start flashing.
4.Use the Channel Up/Down button to change to the channel to read “00” at the selected memory location.
5.Press the MEM/ESC button to erase that channel.
Repeat steps 2 through 5 to erase as many additional memories as you want.
6.Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode.
7.Press and release the MEM/ESC button again to return to Marine Standby mode.
48 English