Uniden EXAI3985 manual Direct wall mounting

Page 13

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone.

2 Set the retainer clip if necessary.

3 Refer to steps 1 through 4 on page 10 to mount the telephone.

G E T T I N G S TA R T E D [ 11 ]

G E T T I N G S T A R T E D

Image 13

Contents Page Page Contents Welcome FeaturesExplanation purposes Flash Controls and FunctionsO N T R O L S a N D F U N C T I O N S Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location Battery use time per charge Install the battery packLow battery alert Connect the base unit Base Setting only Choose the dialing modePress and hold flash/set until you hear a confirmation tone Standard wall plate mounting Setting the handset retainer clip for wall mountingDirect wall mounting Use Or ª To move the pointer to the selection Setting Caller ID OptionsUse To move the pointer between Auto Talk On or Or Cidcw Off depending upon the type of service to whichYou subscribe Press To make your selections and a confirmation toneHandset Ringer Tone Setting Handset Ringer Volume SetupHandset ringer volume setting A confirmation tone will sound Distinctive Ringer SetupAppears Selecting a LanguageFrom the Handset From the Base Handset On the Base Making and Receiving CallsHandset Off the Base Base Volume Adjusting Earpiece VolumeCall Waiting Call Waiting. SeeRedial from Talk Mode Redialing from Standby ModeRedialing a Call From the Base Traveling Out-of-RangeStore Name appears on With the handsetDisplay. Then use the number Keypad to enter the name. PressE M O R Y D I a L I N G Making Calls with Memory Dialing Memory dialing from Standby Mode With the handsetWith the Base Display a programmed number while in memory location list Memory dialing from Talk ModePress talk . Talk Press , ª to scroll through memory locations To selectDeleting the stored data Editing a stored name, phone number or distinctive ringPress to move the pointer to Yes With the Base When speaking on the base When speaking on the handsetWay Conferencing Intercom from the base to the handset Intercom/Page FeatureIntercom from the handset to base Base. The handset beeps. If no answer, pressChain Dialing Call Transfer FeatureTo transfer from the handset to the base To transfer from the base to the handsetMute Handset/Base Tone Dialing Switch-overSelecting a Different Channel You must subscribe to Caller ID service to use this feature When the Telephone RingsCaller ID Viewing the Caller ID Message List When you answer the call, the display changes to TalkPress caller id to return to standby When the pointer is at No When the pointer is at YesDeleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Using the Caller ID ListCalling a party from the Caller ID list Tone sounds and all stored Caller ID messages are deletedStoring Caller ID messages in memory dialing Long distance calls and area code setting/cancellationWhen a new incoming call arrives during your Using Caller ID on Call Waiting ServiceCurrent telephone call, the phone number Name of the caller are displayedFor example Call Waiting Deluxe FeaturesIntegrated Answering Device Using the Menu Mode Setting up your Answering SystemTurning the Answering System On/Off Preset message Setting Your Outgoing Message GreetingRecording a personal outgoing message Greeting Choosing between the two outgoing messagesTo select the minute Setting the TimeSetting a Personal Security Code Adjusting the speaker volume level Setting the base ringer volumeFour times You hear the current ringer option HighSetting the Ring Time Selecting the message record time Announce only featurePlaying your messages Using your Answering SystemSkipping a message Repeating a messageVoice memo Deleting a messageRecording a conversation Remote access away from homeTo stop recording, press or memo/rec Command You may select a command from the following chartTurn on the answering system remotely Changing the Digital Security Code Changing the Face Plate Headset InstallationTo remove the Face plate To attach the Face plate Maintenance Installing the BeltclipPower Failure Battery replacement and handlingSymptom TroubleshootingSymptom Suggestion General Information Battery InformationAC Adapter Information Precautions Installation Considerations K, L IndexRemote Operation Card Remote access away from homeTask Key At Uniden, we’ll take care of you