Panasonic warranty Player, CQ-C300U29

Specifications

	Power Supply
	Current Consumption
	Maximum Power Output
	Tone Adjustable Range
	Speaker Impedance
	Pre-amp Output Voltage
General	Subwoofer-output Voltage
	Pre-amp Output Impedance
	Subwoofer-output Impedance
	Front AUX input
	Input Impedance
	Allowable External Input
	Connector
	Dimensions (Main Unit)
	Weight (Main Unit)

		Sampling Frequency
		DA Converter
Player		Pick-Up Type
		Light Source
		Wave Length
		Frequency Response
CD		Signal to Noise Ratio
		Total Harmonic Distortion
		Wow and Flutter
		Channel Separation
		FM
		Frequency Range
Radio		Usable Sensitivity
		50 dB Quieting Sensitivity
		Frequency Response
		Alternate Channel Selectivity
	Stereo	Stereo Separation
		Image Response Ratio
		IF Response Ratio
		Signal to Noise Ratio
		AM
		Frequency Range
		Usable Sensitivity

Power Output:

18 W RMS x 4 Channels at 4  and 1% THD+N

Signal to Noise Ratio:

85 dBA (reference: 1 W into 4 )

DC 12 V (11 V – 16 V), Test Voltage 14.4 V, Negative Ground

Less than 2.1 A (CD mode, 0.5 W 4-Speaker)

50 W x 4 (at 1 kHz), volume control maximum

Bass: ±12 dB (at 100 Hz), Treble: ±12 dB (at 10 kHz)

4 – 8 

2.5V (CD mode: 1 kHz, 0 dB)

2.5V (CD mode: 1 kHz, 0 dB) 200  200 

10k

2.0 V

3.5 mm  Stereo mini-pin

178 (W) x 50 (H) x 160 (D) mm {7˝ x 1 15/16˝ x 6 5/16˝ } 1.3 kg {2 lbs. 14 oz}

8 times oversampling

1 bit DAC System

Astigma 3-beam

Semiconductor laser

790 nm

20 Hz – 20 kHz (±1 dB)

96 dB

0.01 % (1 kHz)

Below measurable limits

85dB

87.9MHz – 107.9 MHz

10.2dBf (0.9 µV, 75 )

15.2dBf (1.6 µV, 75 ) 30 Hz – 15 kHz (±3 dB) 75 dB

35 dB (at 1 kHz)

55 dB

100 dB

62 dB

530 kHz – 1 710 kHz

27 dB/µV (22 µV, S/N 20 dB)

Above Specifications comply with EIA standards.

Notes:

• Specifications and design are subject to modification without notice due to improvements.

• Some figures and illustrations in this manual may be different from your product.

Notes on Discs, Maintenance/Fuse, Specifications English

CQ-C300U29