Pioneer AVH-P4100DVD installation manual Connecting the units

Page 7

Connecting the units

English

Fuse resistor

Violet/white

Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. This connection enables the unit to sense whether the car is moving forwards or backwards.

Yellow/black

If you use equipment with Mute function, wire this lead to the

Audio Mute lead on that piece of equipment. If not, keep the

Audio Mute lead free of any connections.

Connection method

1. Clamp the lead. 2. Clamp firmly with needle-nosed pliers.

Note:

·The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner’s Manual or dealer.

Light green

Used to detect the ON/OFF status of the parking

brake. This lead must be connected to the power Power supply side supply side of the parking brake switch.

Ground side

Blue/white

Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).

With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.

Parking brake switch

When you connect the separately sold multi-channel processor (e.g., DEQ-P8000) to this unit, do not connect anything to the speaker leads and system remote control (blue/white).

Note:

·Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural.

7

Image 7
Contents AVH-P4100DVD Contents Connecting the units ACC position No ACC position Parts supplied Connecting the power cord Connecting the units LeftRight When connecting to separately sold power ampWhen connecting with optional CD-IU200V cable When connecting with supplied USB cableReversed images When connecting with a rear view cameraWhen connecting with a multi-channel processor Connect the optical cable and ground lead to the main unit Connecting and installing the optical cable connection boxWhen connecting the external video component and the display Installation using the screw holes on the side of the unit InstallationFastening the unit to the factory radio-mounting bracket English Raccordements des appareils Table des matièresRaccordements des appareils Position ACC Pas de Position ACC Raccordements des appareilsPièces fournies Vert/noir Violet/noir Branchement du cordon d’alimentationRemarque GaucheDroit Raccordement avec le câble optionnel CD-IU200V Raccordement avec le câble USB fourniUn miroir Raccordements à une caméra de reculCaméra capable de Fournir des imagesLors du raccordement d’un processeur multi-canaux Raccordement du câble à fibres optiques Raccordements à un appareil vidéo externe et à un écran Installation à l’aide des perçages sur le côté de l’appareil Français Conexión de las unidades ContenidoAdvertencia Conexión de las unidadesPosición ACC Sin posición ACC NotaPiezas suministradas Conexión del cable de alimentación Nota IzquierdaDerecha Cuando conecte con el cable CD-IU200V opcional Cuando conecte con el cable USB suministradoLa imagen de la pantalla puede aparecer invertida Cuando conecte con una cámara de vista traseraIP-BUS Cuando conecte con un procesador multicanalConexión del cable óptico Cuando conecte el componente externo y la pantalla Instalación con agujeros de tornillo en el lado de la unidad InstalaciónCRD4377-A/N UC
Related manuals
Manual 116 pages 52.01 Kb