I V . O P E R A T I O N
PROHIBITED! Avoid exposure to rain, snow, ice, salt, or standing water whenever possible. Maintain and store in a clean and dry condition.
HAND/REMOTE CONTROL OPERATION
Hand Control
The hand control for the SilverBoom 300 operates the lift- ing strap in two directions, up and down. See figure 14.
Power Rotating Base
The hand control for the SilverBoom 300 power rotat- ing base operates the lifting strap up and down and the
WARNING! Excercise extreme caution when operating the power rotaing base. Be aware of moving parts.
Remote Control
The remote control for the SilverBoom 300 equipped with a power rotating base operates the lifting strap up and down and the
Programing The Remote Control
1.Press any button on the remote control. Ensure that the LED lights up.
2.Align the remote control and receiver on the base of the lift in a straight line and keep them apart by at least 12 inches (30.48 cm) . Bringing them closer may lead to a failed programming operation.
3.Press the top button and the right button on the base station and hold it for 5 seconds.
4.Release the buttons when the LED on the power base begins to blink.
5.Try the remote control to ensure it works correctly.
PRESS TO OPERATE LIFTING
STRAP IN A DOWNWARD
DIRECTION
PRESS TO OPERATE
LIFTING STRAP IN AN
UPWARD DIRECTION
Figure 14. Hand Control (SilverBoom 300)
PRESS TO OPERATE LIFTING STRAP IN AN UPWARD DIRECTION
PRESS TO ROTATE | PRESS TO ROTATE | |
THE | ||
THE | ||
THE LEFT | ||
THE RIGHT | ||
|
PRESS TO OPERATE LIFT IN A DOWNWARD DIRECTION
Figure 14A. Hand Control (SilverBoom 300 With A Power Rotating Base)
PRESS TO OPERATE LIFTING STRAP IN AN UPWARD DIRECTION
PRESS TO ROTATE | PRESS TO ROTATE | |
THE | ||
THE | ||
THE LEFT | ||
THE RIGHT | ||
|
PRESS TO OPERATE LIFT IN A DOWNWARD DIRECTION
Figure 14B. Remote Control (SilverBoom 300 With A Power Rotating Base)
SilverBoom 300 | www.silverstarlifts.com | 15 |