Pride Mobility INFMANU3210 manual Lifting Capabilities Installation, Lifting NON-PRIDE Items

Page 7

I I . S A F E T Y

LIFTING CAPABILITIES

The SilverBoom 300 is designed to lift a maximum weight of 300 lbs. (136 kg). Under no circumstances should the SilverBoom be made to exceed this weight limit. Subjecting the SilverBoom to the strain of lifting more than it is designed to, may cause it to fail, resulting in damage to the mobility product and/or injury to the lift operator. Refer to the mobility product owner’s manual for information on the overall weight of the mobility product before lifting with the SilverBoom.

WARNING! Adding accessories, oversized batteries, or a different seat will increase the weight of your mobility product. Verify with your authorized Pride Provider that the total weight of your mobility product, including the additions, does not exceed 300 lbs. (136 kg).

INSTALLATION

Your SilverBoom lift system was designed to be mounted primarily in a motor vehicle. Mounting your SilverBoom on a platform, where the height of the lift may cause the lifting strap to extend beyond a safe point, can damage the SilverBoom and injure the operator of the lift. The distance between the top of the boom-arm and the mobility product should not exceed 70 in (178 cm) when the boom-arm is fully extended.

ReadandfullyunderstandthedirectionsfordrillingthemountingholesfortheSilverBoom basebeforeinstallingtheliftsystem.

WARNING! Before drilling the mounting holes in your vehicle, make absolutely certain through a visual inspection that there are no obstructions in the path of the drill bit, such as the fuel tank, exhaust pipes, or electrical wires.

LIFTING NON-PRIDE ITEMS

The SilverBoom is an extremely versatile device, which users may employ to lift items other than Pride products. Pride has no control over such use, nor can Pride anticipate every possible use to which a SilverBoom may be put. Lifting non-Pride products with the SilverBoom is done at the operator’s own risk, and Pride accepts no liability for damage or injury resulting from such use.

PRELIFT INSPECTION

Inspect the lifting strap of the SilverBoom before every use for twisting, fraying, and signs of wear. If signs of wear become evident, have the strap replaced by your authorized Pride Provider.

WARNING! A frayed or worn lifting strap can snap, resulting in damage to the mobility product being lifted and injury to the lift operator.

OPERATOR POSITIONING

Keep hands clear of the lifting strap while the SilverBoom is lifting/lowering a mobility product. The operator of the lift should stand a safe distance from the unit being lifted/lowered to ensure that his/her feet are never positioned under a raised mobility product.

TRANSPORT VEHICLE POSITIONING

Be sure your vehicle is parked on flat, level ground and the emergency brake is engaged before attempting to lift a mobility product.

WARNING! Attempting to lift a mobility product when a vehicle is not on level ground will cause the mobility product to swing toward or away from the vehicle, making it difficult to get the mobility product into the vehicle.

SilverBoom 300

www.silverstarlifts.com

7

Image 7
Contents SilverStar Phone Number Purchase Date Serial Number F E T Y G U I D E L I N E SIII N T E N T SInformation Exchange N T R O D U C T I O NInternet and Private Purchases PURCHASER’S Agreement Shipping and DeliveryS a F E T Y Product Safety SymbolsS a F E T Y Operator Positioning Lifting Capabilities InstallationLifting NON-PRIDE Items Prelift InspectionPower Rotating Base Shroud RE- Moval I . InstallationDetermine L-BASE Location Assembling the Lift Trunk Installation Silverboom 300 Manual Rotation onlyTo adjust the height adjustment ring Hatchback INSTALLATION- MINIVANS, Station WAGONS, ETCTools needed for installation BOOM-ARM AdjustmentTo adjust the boom-arm Base InstallationMounting Bolts Base Cap Installation Electrical Wiring InstallationFUSE25-AMP Crimp Here Automobile Battery O P E R a T I O N HAND/REMOTE Control OperationLifting the Mobility Product To replace the batteries of the remote controlUsing a C-arm Manual Lift Strap Operation BOOM-ARM Manual Rotation Models with a Power Rotating BaseLift Stops Operating TroubleshootingTo reset the main circuit breaker Lift will not OperateTo restore proper lifting strap travel Perform every 6 months Perform every 36 months Power Rotating Base onlyM a I N T E N a N C E S C H E D U L E Perform prior to daily useI . W a R R a N T Y THREE-YEAR Transferable Limited WarrantyONE-YEAR Warranty Service Checks and Warranty ServicePage INFMANU3210