Pride Mobility INFMANU3210 M a I N T E N a N C E S C H E D U L E, Perform prior to daily use

Page 21

V I . M A I N T E N A N C E S C H E D U L E

The following routine maintenance should be performed at the indicated intervals. Failure to perform the required maintenance procedures at the required intervals may void Pride’s product warranty.

Perform prior to daily use:

Inspect lift strap wear and replace if necessary.

Inspect swivel hook for damage and to ensure it rotates freely.

Inspect all external electrical connectors for damage and replace if necessary.

Perform every 6 months:

Inspect all mounting hardware for defects and a secure fit. Any hardware found to be loose, should be tightened or replaced if necessary.

Perform every 6 –12 months:

Remove upright post and lubricate with “General Purpose Petroleum Based Grease”.

Remove plastic shrouds and visually inspect chains for damage and replace if necessary.

Lubricate chains with “General Purpose Petroleum Based Grease”.

Inspect plastic shrouds for cracks or damage and replace if necessary.

Perform every 36 months (Power Rotating Base only):

Remove plastic shroud and apply anti-seize lubricant to the main drive sprocket shaft.

NOTE: Use “Petroleum Based Anti-seize lubricant” only.

SilverBoom 300

www.silverstarlifts.com

21

Image 21
Contents SilverStar Phone Number Purchase Date Serial Number F E T Y G U I D E L I N E SIII N T E N T SInternet and Private Purchases PURCHASER’S Agreement N T R O D U C T I O NShipping and Delivery Information ExchangeS a F E T Y Product Safety SymbolsS a F E T Y Lifting NON-PRIDE Items Lifting Capabilities InstallationPrelift Inspection Operator PositioningI . Installation Power Rotating Base Shroud RE- MovalDetermine L-BASE Location Assembling the Lift Trunk Installation Silverboom 300 Manual Rotation onlyTo adjust the height adjustment ring Hatchback INSTALLATION- MINIVANS, Station WAGONS, ETCTo adjust the boom-arm BOOM-ARM AdjustmentBase Installation Tools needed for installationMounting Bolts Base Cap Installation Electrical Wiring InstallationFUSE25-AMP Crimp Here Automobile Battery O P E R a T I O N HAND/REMOTE Control OperationLifting the Mobility Product To replace the batteries of the remote controlUsing a C-arm Manual Lift Strap Operation BOOM-ARM Manual Rotation Models with a Power Rotating BaseTo reset the main circuit breaker TroubleshootingLift will not Operate Lift Stops OperatingTo restore proper lifting strap travel M a I N T E N a N C E S C H E D U L E Perform every 36 months Power Rotating Base onlyPerform prior to daily use Perform every 6 monthsONE-YEAR Warranty THREE-YEAR Transferable Limited WarrantyService Checks and Warranty Service I . W a R R a N T YPage INFMANU3210