QSC Audio AD-S82 Optional Mounts Available, Optional ID-8 and ID-8T Mounting Procedure

Mounting

If using the loudspeaker only (no optional mount), the loudspeaker can be set on any appropriate surface. The cabinet will lean back at a slight angle when set on a flat surface.

When operated at high output levels, the cabinet can generate sufficient vibration, causing the cabinet to move or creep if set on a hard surface. Use anti-slip matting under the cabinet or self-adhesive rubber feet to keep the cabinet from creeping.

On the back of the loudspeaker, near the bottom, is a safety cable attachment point. Install a safety cable strong enough to sup- port several times the weight of the loudspeaker assembly in the event it may fall. The cable must be secured to a secondary sup- port point which is also strong enough to support several times the loudspeaker’s weight.

EN

IMPORTANT! ENSURE THAT THE

LOUDSPEAKER IS MOUNTED PROPERLY AND A SAFETY

CABLE IS INSTALLED TO RETAIN THE LOUDSPEAKER IN THE EVENT OF A MOUNTING FAILURE.

Optional Mounts Available

Ensure the mounting surface and supporting struc- ture are appropriately strong enough to support the loudspeaker assembly and any potential vibration or seismic activity.

Attach a safety cable to the attachment point on the bottom-back of the loudspeaker. Ensure the safety

cable, cable attachment technique, securing hard- ware, and attachment points are strong enough to support several times the weight of the loudspeaker in the event of a primary-mount failure.

ID-8 and ID-8T IntelliDock™ Mounts (YM-8 models, see p.6)

This mount features a quick-connect/disconnect latch which provides electrical connections and a highly-adjustable ball- type mount. This mount allows for all mounts and wiring to be fully installed and the loudspeakers to be placed at the last possible moment.

A security retaining screw for the latch in included, making speaker removal impossible without the correct Allen (hex) bit to remove the screw. The IntelliDock mount and its wiring feed-through bushing provide maximum weather resistance and maximum acoustic coverage range adjustment.

The ID-8T is identical to the ID-8, but equipped with an audio matching transformer with 70V and 100V distributed audio input capability.

Refer to the instructions included with the mount for detailed informa- tion.

Optional ID-8 and ID-8T Mounting Procedure

1- Secure the ball mount bracket to the mounting surface.	2- Feed the speaker wire through the cover. Secure
The adapter plate can be removed if desired, however, we	the cover to the ball-mount assembly.
recommend its use. Ensure the mounting surface and sup-
porting structure are appropriately strong enough to sup-
port the loudspeaker assembly and any potential vibration
or seismic activity.

4