QSC Audio AD-S82H user manual Specifications, Tap 60W 108 dB

Specifications

	AD-S82		AD-S82H
Frequency Response1:	85- 22k Hz (-6 dB)		80- 21k Hz (-6 dB)
	55- 23k Hz (-10 dB)		60- 22k Hz (-10 dB)
Maximum Output2:	110 dB SPL continuous rms output		113 dB SPL continuous rms output
(calculated)	116 dB SPL peak output		119 dB SPL peak output
Impedance:	8 ohms nominal		8 ohms nominal
	6.4 ohms minimum, 240 Hz		7.0 ohms minimum, 210 Hz
	25 ohms maximum, 2.5k Hz		135 ohms maximum
Power Rating3:
rms (IEC 100 hrs):	100 watts rms		200 watts rms
recommended amp power:	200 watts rms		400 watts rms
Sensitivity:	90.0 dB, 1 watt, 1 meter, free field (4 pi)		90.5 dB, 1 watt, 1 meter, free field (4 pi)
Directivity Index:
500 Hz	3.8		4.0
1000 Hz	5.8		5.5
2000 Hz	12.6		11.7
4000 Hz	10.2		8.9
8000 Hz	9.8		8.6
16000 Hz	9.7		7.2
Q:
500 Hz	2.4		2.5
1000 Hz	3.8		3.6
2000 Hz	18.2		14.7
4000 Hz	10.4		7.7
8000 Hz	9.5		7.3
16000 Hz	9.2		5.3
Weight:	16.2 lb. (19.6 lb.)		16.9 lb. (20.3 lb.)
(net (shipping))
		All Models
Nominal Coverage:		90° horiz. x 60° vert.
Enclosure and Grill:		high impact polystyrene, removable metal grill
Connectors:		binding posts, 19 mm (0.75”) spacing, accepts wire and banana plugs
Optional 8 Ohm Mounting Hardware:		QSC IntelliDock mount ID-8 or yoke mount YM-8
Optional 70V/100V Transformer
Equipped Mounting Hardware:		QSC IntelliDock mount ID-8T or yoke mount YM-8T

ID-8T and YM-8T Power and Calculated Continuous Maximum Output (dB SPL) by Tap Selected:

	70.7V line	100V line
Tap 1: 7.5W (99 dB)		15W (102 dB)
Tap 2: 15W (102 dB)		30W (105 dB)
Tap 3:	30W (105 dB)	60W (108 dB)
Tap 4:	60W (108 dB)	n/a

NOTES:

1- All frequency ranges specified refer to measured free-field response (4 pi).

2- Calculated maximum peak SPL at 1 m, free-field, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.

3- Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.

Specifications are subject to change without notice.

EN

9