Lowrance electronic LHR-80 manual Hi/Lo, Wx/Nav

Page 11

Press and hold down SCAN for more than 2 seconds to enter ALL SCAN mode where the priority channel is checked every 1.5 seconds.

When a signal is received, scanning stops at that channel and “R” appears on the screen. If the signal ceases for more than 5 seconds, the scan restarts.

In ALL SCAN mode, when a signal is received, holding down left- key for more than 2 seconds makes appears on the screen. This “always busy” channel will not have been skipped in the next scan period. If this channel needs recover, holding down left-key once again for more than 2 seconds makes disappear. The skip function is cancelled accordingly. Besides, it is impossible to skip over the priority channel.

Enter. Use ENTER when navigating menus, to confirm entries and edits.

CH /

Channel Select. The current channel is shown on the screen in BIG digits with the channel description information below the channel number.

Press CH / to step through the available channels one at a time, or hold down to scroll quickly through all the available channels. See Appendix B for a listing of channel charts.

Alphanumeric Entry. This key can also be used for menu selection and alphanumeric entry. Press CH / to scroll the cursor up or down menu options when navigating menus.

When editing an item that contains only numbers, press - CH to count through the num- bers or hold down to scroll through quickly.

To enter a character, press CH to step through the alphabet or hold down to scroll through quickly.

HI/LO/

Transmission Power. High (HI) 5W or Low (LO) 1W. Press to toggle between high or low transmission powers for the entire channel bank. The or selection is shown on the LCD screen.

Some channels allow only low power transmissions. Error beeps will sound if the power transmission setting is incorrect.

Some channels allow only low power transmissions initially, but can be changed to high power by holding down HI/LO and PTT all at the same time. See Appendix B for a complete listing of channel charts.

hold down and enter GPS Satellite mode.

WX/NAV

Quickly press to access WX channel (US/Canada only).

Lowrance - LHR-80 Installation and Operation Instructions

11

Image 11
Contents LHR-80 Please read carefully before installation and use Important safety informationContents GPS/DATA Sending and Receiving DSC Calls US only Shipping Information Safety and Operational InformationFCC Statement General Information Controls and Keys POWER/KEYLOCKKeys/Controls & Functions WX/NAV HI/LOCALL/MENU GO/MOBPTT Initial Charge Installing the Battery PackVHF Radio Operation Batteries and ChargerGPS Navigation Receiver GPS ConnectorFunction Mounting Battery Charger to flat surfaceMounting Battery Charger and bracket onto wall Installing the Belt Clip Removing the antenna Installing and Removing the AntennaInstalling the antenna Volume control Power On/OffAdjusting the Squelch level Priority channel Channel selectionReceiving and transmitting 16/9 Priority channelModify or Delete favorite channel Dual Watch Operation10 3CH Operation Favorite Channel Add a favorite channel for the first time3CH Scan Navigation ModeScan Operation All ScanCamp WP Select ModePlotter Mode SQLGPS Satellite Mode Following options are available through Menu How to Display and Navigate MenusHow to Enter Alphanumeric and Alphabet Data Advanced OperationReset Radio SetupDSC Setup Atis SetupAdd a new buddy name Buddy List Manage your buddy list. US onlyDelete a buddy name Edit a buddy nameSave Moor YES WaypointAdd a new waypoint Enter WPBacklight Fish Edit a waypointMenu Select Waypoint WP List Waypoint WP List NEW WPHome Delete a waypointSet a route to a stored waypoint TempContrast Adjustment Backlight AdjustmentLamp Adjustment Backlight Manual Contrast SettingManual Manually Enter Your Position and UTC Time LOCAL/DST GPS/DATASettings Time Display Show or hide the time Settings LL Display Show or hide your positionTime format Pm LOC Gps/data Time disply Menu select GPS/data SettingTime Offset Local time Time offset ContrastTime format 24 Hr Gps/data Time disply Pm LOC Settings Time Format 12 or 24 hour clockTime offset 12 Hr Contrast Gps/data Gps alert Settings COG/SOG Course & speed display optionsGPS Alert Coast Guard 356 12.6KTS 27 34.126’N 109 55.568’wMAG Variation Turn GPS Enable on/offGPS Enabled Set True or Magnetic BearingUIC Radio SetupUIC US only Channel Name EditingSelect Unit Units Ring Volume AdjustmentBeep Volume Adjustment Set Nmea OUT Nmea OUT Set the Priority Channel Watch Mode US OnlyRadio Setup Watch Mode KEY Beep WX Alert Weather alertsEnter or check your User Mmsi DSC Setup US onlyUser Mmsi Maintain GroupsNo Mmsi ID Is Store FisherFishing Edit Edit Mmsi Store Sailing Delete Group Setup Fishing Edit Name Fishers Manual NEWLL Reply Response to Individual CallsDSC Select Enter or Check your Atis Mmsi Atis Setup EU onlyDSC Setup LL Reply Indiv Reply Manual DSC Select Auto OFF Atis mmsi 9100005366 Input again Store CancelAtis Select OFF Atis Setup Atis SelectGet Buddy Atis SelectErase Track Reset Reset to factory defaultsMenu Select Reset Radio Track LogHow can I obtain a Mmsi assignment? What is DSC?Maritime Mobile Service Identity Sending and Receiving DSC Calls US onlyCall Type Description DSC Call TypesSend an Individual call RD Group Send a Group CallSend an All Ships call DSC CallCall LOG Reply to a call in your Call LogGroup Individual Call Back ALL Ships Routine DeleteReply to a call in your Distress Log SET Channel SEND? Reply to the Last CallDSC Call Barry Individual Last Call Routine Group Call 1022 utcAdd or Delete a Buddy Buddy List Request the LL position of a buddy LL RequestTrack Your Buddy Track Buddy Start Tracking Select your want track’s buddySet the time interval of tracking Rcv group gp rd group lvh-880 esc -exit Receive an All Ships callReceive a Group call Automatically reply to an LL position request Reply to an LL position requestManually reply to an LL Request ESC Exit Receive an individual callReceive a Polled Position Call Do not reply to an LL position requestSend a Distress Call Distress Calls US onlyReceive a Distress Relay Call Receive a Distress CallRelay a Distress Call from the Distress LOG Relay Receive Distress Acknowledgement Distress ACKPress Enter to Relay the distress call Lowrance LHR80US & LHR-80EU Appendix a Technical SpecificationsGeneral ReceiverGPS and Navigation TransmitterInternational Marine Channels Appendix B Frequency ChartsSpecial Notes on International Channel Usage Power-up USA Channel ChartSpecial Notes on USA Channel Usage Canada Channel Chart Special Notes on Canada Channel Usage Traffic Type Name Remark Weather ChannelsCountry Specific table Appendix C EU Inland Waterway ChannelsGeneral remarks to Country Specific table Explanation of specific footnotes in Country Specific table Shore Special ChannelsNavico Full Two-Year Lowrance VHF Warranty Outside Canada and the USA How to Obtain ServiceUSA CanadaShipping Information Accessory Ordering Information for all countries1177