Lowrance electronic LHR-80 Receive an individual call, Receive a Polled Position Call, ESC Exit

5-12-3 Do not reply to an LL position request

Position REQ 123451234 LL REPLY OFF ESC->EXIT

When the radio receives an LL position request, it will beep to alert you. The LCD screen will display, the position request, and the caller’s MMSI. The radio will show that the reply facility is OFF. Press <ESC or PTT to return to the previous screen. The LL position request is not stored in the call log.

5-13 Receive an individual call

The radio makes a friendly two-tone alert when it detects an incoming DSC call.

Incoming individual calls are always a priority, and should be part of your protocol.

rcv: indiv	67 channel
123456789	request
routine
enter->ack	esc->exit

If the radio recognizes the user MMSI as one of your buddies, your buddy’s name is displayed. Your radio can automatically or manually reply to the incoming caller depending on the INDIV REPLY settings.

1.Press ENTER to send an acknowledgement to the incoming caller, or LHR-80 automatically sends an acknowledgement to the caller. This stops the two-tone alert. The radio automatically detects the channel of the incoming call.

2.The caller should respond, you can press PTT to initiate contact.

5-14 Receive a Polled Position Call

Position ACK	POSITION ACK
12341234	12:45 UTC
ESC > EXIT	82°50.123’N
	127 ° 45.142’W

When you receive GPS position data from a buddy in response to your LL request, you are recommended make note of it - especially if it is a good fishing position.

If enhanced LL position information is available, it is shown on the LCD until the display changes.

Lowrance - LHR-80 Installation and Operation Instructions 59