4-6-6 Settings: COG/SOG (Course & speed display options)
If your position and time data is being updated, you can use COG/SOG to choose whether to show or hide your course over ground (COG) and speed over ground (SOG) data on the screen.
Note: Despite the COG/SOG setting, if TIME DISPLAY is ON, the course and speed will not display on screen.
|
|
|
|
|
|
|
|
| MENU | GPS/DATA | SETTING | COG/SOG | |||
| BUDDY LIST |
| MANUAL |
| TIME DISPLAY |
| >ON |
| CONTRAST |
| >SETTING |
| LL DISPLY |
| OFF |
| >GPS/DATA |
|
|
| >COG/SOG |
|
|
|
|
|
|
|
|
|
|
COAST GUARD 356° 12.6KTS 27° 34.126’N 109° 55.568’w
1.In radio
2.Move the cursor to SETTING and push ENTER.
3.Move the cursor to COG/SOG and push ENTER.
4.Select ON or OFF as desired, In this example, ON has been selected, so the screen shows the bearing and speed.
If COG/SOG is set on, the time is NOT display on the screen.
4-6-7 GPS Alert
You can choose NO GPS DATA alarm sound is on/off.
|
|
|
|
|
|
|
|
| Menu select | GPS/data | setting | gps alert | |||
| buddy list |
| manual |
| ll disply |
| >ON |
| contrast |
| >SETTING |
| COG/SOG |
| OFF |
| >gps/data |
|
|
| >gps alert |
|
|
|
|
|
|
|
|
|
|
1.In the radio setup menu, select GPS/DATA then SETTING, next select GPS ALERT.
2.Select ON/OFF as desired, in this example, ON has been selected, so if GPS DATA is not available, the NO GPS alert will sound.
36 | Lowrance - |