Installation of Indoor Unit
(1)Install the indoor unit level on a strong wall which is not subject to vibration.
(2)The inlet and outlet ports should not be obstructed : the air should be able to blow all over the room.
(3)Do not install the unit where it will be exposed to direct sunlight ,
(4)Install the unit where connection to the outdoor unit is easy.
(5)Install the unit where the drain pipe can be easily installed.
(6)Take servicing , etc.into consideration and leave the spaces shown in (Fig.1 or 2) . Also install the unit where the filter can be removed .
Fig. 1 | Ceiling |
INDOOR UNIT
3"(80mm) | 6"(150mm) |
over | over |
0.4"(10mm) |
over |
FOR HALF CONCEALED INSTALLATION | Ceiling panel |
| |
Fig. 2 |
|
INDOOR UNIT |
|
3"(80mm) | 6"(150mm) |
over | over |
Ceiling panel
0.4"(10mm) |
over |
13