Haier AC602AFEAA, AC522AFERA, AC482AFEAA, AC362AFEAA, AC362AFERA, AC282AFERA FRESH-AIR Intake

Page 24

Installation of Indoor Unit

FRESH-AIR INTAKE

(1)Open up the knockout hole for the fresh-air intake,as shown in Fig.16 (If using half-concealed installation ,open up the top knockout hole instead)

Fig. 16

For half-concealed

 

CAUTION

(1)When removing the cabinet(iron plate),be careful not to damage the indoor unit internal parts and surrounding area(outer case).

(2)When processing the cabinet(iron plate),be careful not to injury yourself with burrs,etc.

(2)Fasten the round flange (optional) to the fresh air intake,as shown in Fig.17 (If using half-concealed installation, attach to the top.)

Fig. 17

Round duct (option parts)

[After completing " INDOOR UNIT INSTALLATION"....]

(3)Connect the duct to the round flange.

(4)Seal with a band and vinyl tape,etc.so that air does not leak from the connection.

Fig. 18

Duct

22

Image 24
Contents Operation & Installation Manual Contents Disposal of the old air conditioner EAA ERASafety Precautions Safety Precautions Features and Functions Automatic OperationPress the AIR Flow Direction Vertical SET button Press the AIR Flow Direction Horizontal SET buttonRIGHT/LEFT Name of Parts For series 282, 362, 422, 482Cleaning and Care Following four procedures are for series 282, 362, 422, 482Operation Tips Operation and Performance Heating PerformanceInstallation of Indoor Unit LocationSelecting the Mounting Position Indoor Unit Install the room air conditioner as follows Supension-bolt pitch should be as shownDrilling the Holes and Attaching the Suapension Bolts For HALF-CONCESLED Installation Installing the Coupler Heat Insulation Flat washerGood Badbad Installation of Indoor Unit Electrical Wiring Electrical Requirement FRESH-AIR Intake T N 1 2 Customer Guidance Trouble Shooting Followings are not problemsPoor cooling or heating Poor coolingSeries RemarksError display For EAA series Haier Group