0Z034-3940_UG.qx 9/11/06 12:22 PM Page 15
Using a Nike + iPod Remote
You can use a Nike+ compatible remote (sold separately) to control Nike + iPod wirelessly while you work out. Before using a remote, you have to link the receiver to it.
To link to a remote:
1Connect the receiver to an iPod.
2Choose Nike+iPod > Settings > Remote > Link and follow the onscreen instructions.
To turn remote functionality on or off:
mChoose Nike+iPod > Settings > Remote and set Remote Commands to On or Off.
To unlink a remote:
mChoose Nike+iPod > Settings > Remote > Unlink and follow the onscreen instructions.
Linking the Receiver to Another Sensor
You can use your iPod and Nike + iPod Receiver with more than one Nike + iPod Sensor. You may want to do this, for example, if there’s more than one person in your family with a sensor and Nike+ ready shoes. Each time you use a receiver with a different sensor, you must link the receiver to that sensor.
If you connect the receiver to a different iPod and use it with the same sensor, the receiver remembers your settings. You don’t need to relink or recalibrate.
To link a receiver to another sensor:
1Connect the receiver to an iPod.
2Put on the shoes with the new sensor, and make sure there is no other Nike + iPod Sensor nearby.
You may have to walk around to activate the sensor so your receiver can detect it.
15