JVC HM-HDS1U manual SET Remote Control Code, Enter Remote Control Code, Confirm the Setting

Control Four JVC VCRs

The remote control is capable of controlling two JVC VCRs independently; one set to respond to your remote control's A code control signals and the other set to respond to B, C, D code control signals. The remote control is preset to send A code signals because your recorder is initially set to respond to A code signals. You can easily modify your recorder to respond to the other code signals.

2

EN 85

SET REMOTE CONTROL CODE

Press and hold HDD on the remote control until “A” starts blinking on the display window of the remote control.

VCR A

ENTER REMOTE CONTROL CODE

HDD 1

2

1 2 3

4 5 6

7 8 9

< 0 >

1

2

POWER

3

4

OK

3

Press one of the following buttons to enter the desired cord, then press OK. The current setting code of the remote control appears on the display window.

2: sets the remote control code to “B”

3: sets the remote control code to “C”

4: sets the remote control code to “D”

1: sets the remote control code to “A”

VCR C

Ex. When pressing 3.

PREPARE THE RECORDER FOR RECEIVING CONTROL CODE

STOP

–+

POWER				PLAY
POWER						EJECT
					DIGITPURE TECHNOLOGY
HM-HDS1
REC LINK	STOP	PLAY	PAUSE	REC	S-VHS ET
HDD				S-VHS	VIDEO	(M) L – AUDIO – R
MENU NAVI					REW FEW
OK						S-VIDEO
CH					A. DUB	PAUSE
					F - 1

4

5

6

1)To turn off the unit, press POWER on the front panel.

2)Press PLAY on the front panel for 5 seconds. The current setting code of the unit appears on the display.

A

TRANSMIT THE NEW CODE TO THE RECORDER

Press STOP on the remote control. The new code is transmitted to the unit and blinks for about 5 seconds on the display, then the clock time appears.

C

CONFIRM THE SETTING

Press POWER on the remote control. When the unit is turned on, the setting is complete. If the unit is NOT turned on, repeat from step 1.

1

TURN ON THE RECORDER

Press POWER.