JVC HM-HDS1U Re-perform the VCR Plus+ setup, Plus+ system doesn’t work properly, Procedure  pg

Page 88

88 EN

TROUBLESHOOTING (cont.)

TIMER RECORDING

 

SYMPTOM

 

POSSIBLE CAUSE

 

CORRECTIVE ACTION

7.

Cable channels are not automatically

● The Controller is not properly

Connect the Controller correctly

 

switched during timer recording.

connected to the recorder.

( pg. 15).

 

 

 

● The output channel selected in the

After confirming your cable box’s

 

 

 

Cable Box Set screen is incorrect.

output channel number, re-access the

 

 

 

 

 

Cable Box Set screen and select the

 

 

 

 

 

correct number ( pg. 16).

 

 

 

● The cable box’s power is off.

Make sure the power is on before

 

 

 

 

 

timer recording starts.

 

 

 

 

 

 

8.

Satellite channels are not automati-

● The Controller is not properly

Connect the Controller correctly

 

cally switched during timer

connected to the recorder.

( pg. 18).

 

recording.

● The output channel selected in the

After confirming your DBS receiver’s

 

 

 

DBS Receiver Set screen is incorrect.

output channel number, re-access the

 

 

 

 

 

DBS Receiver Set screen and select the

 

 

 

 

 

correct number ( pg. 19).

 

 

 

● The recorder is not set correctly to

Set the correct DBS Receiver brand

 

 

 

control the DBS Receiver.

code ( pg. 20).

 

 

 

● The DBS receiver’s power is off.

Make sure the power is on before

 

 

 

 

 

timer recording starts.

 

 

 

 

 

 

9.

Timer recording begins as sched-

● Even though you don't use an

Set "CABLE BOX SET" to "OFF"

 

uled, but the channel is always

external Cable Box, “CABLE BOX

( pg. 16).

 

incorrect.

SET” is set to “ON”.

 

 

 

 

 

 

10.We moved, and now the recorder

● The receivable stations in the new area

Re-perform the VCR Plus+ setup

 

Plus+ system doesn’t work properly.

are received on different channels than

procedure ( pg. 54).

 

 

 

those in the previous area.

 

 

 

 

 

 

 

11.

“PROGRAM FULL” is displayed on

● All 16 programs are used.

Wait until a space in memory clears,

 

the screen.

 

 

or cancel unnecessary program

 

 

 

 

 

information ( pg. 61).

 

 

 

 

 

 

OTHER PROBLEMS

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSE

 

CORRECTIVE ACTION

1.

When scanning channels, some of

 

● Those channels have been preset to

If you need the skipped channels,

 

them are skipped over.

 

be skipped.

restore them ( pg. 14).

 

 

 

 

 

 

2.

The channel can’t be changed.

 

● Recording is in progress.

Press PAUSE to pause the recording,

 

 

 

 

 

change channels, then press PLAY to

 

 

 

 

 

resume recording.

 

 

 

 

 

 

3.

The remote control won’t operate

 

● The remote control brand setting is

Re-set the remote control to the

 

my TV or cable box or DBS receiver.

 

incorrect.

correct brand ( pg. 82 or 83 or 84).

 

 

 

 

 

 

4.

Even though Auto or Semi-Auto

 

● The clock setting data received from

Select a different Host Channel during

 

clock setting has been selected, the

 

the Host Channel is incorrect.

the Semi-Auto setting procedure

 

clock is incorrect.

 

 

 

( pg. 11), or perform the Manual

 

 

 

 

 

setting procedure ( pg. 12).

ATTENTION

This recorder contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the recorder does not operate correctly switch its power off and unplug the power cord from the AC supply. Wait for a while and then plug the power back in. Eject and check the condition of the cassette. If everything appears normal resume operating the recorder as usual.

Page 87 Page 89
Image 88
Page 87 Page 89
Contents HM-HDS1U Dear Customer Do not place the recorderInstallation Antenna Installation Instructions USEBefore YOU Install Your NEW Recorder ServicingBefore using the recorder Before installing the recorderWhile using the recorder Contents Check Contents Power SourceConnections Situate RecorderPlug & Play Setup Plug & PlayAuto Clock Set/Auto Tuner Set Auto blinks Channel numbers are displayedAccess Main Menu Access Initial SET ScreenAccess Clock SET ClockSelect D.S.T. Mode SET Auto Clock to onSelect Host Channel Select Time ZoneSET Time SET DateSET Year ManualAccess Tuner SET Screen TunerTurn on the Recorder Set Receivable ChannelsAccess Main Menu Screen Access Tuner SET ScreenAccess Manual Channel SET Screen ADD or Skip DesiredCable Box Control Situate ControllerAttach Controller Connect Cable BOX to RecorderTurn on Cable BOX Access Cable BOX SET ScreenSelect Cable BOX Output Channel Access Cable BOX Brand SET Screen Enter Cable BOX BrandFasten securely using the supplied adhesive strips DBS Receiver ControlController DBS receiverAccess DBS Receiver SET Screen At the Initial Set UpTurn on DBS Receiver Set DBS Receiver Output Channel & DBS Receiver BrandAccess DBS Receiver SET DBS Receiver BrandAccess Function Setting Blue BackSelect Blue Back Mode Setting Video Inputs Mode Access Video Inputs ScreenSelect Video Inputs ModeSimple Recording Simple Playback Start PlaybackPause Playback Stop PlaybackPlayback with HDD Navigation Icons and their meaningsSelect Programs Access Scan ScreenScan for Beginnings of Programs Setting Time for Live Memory Playback Live Memory PlaybackStart Live Memory Playback About Live Memory PlaybackAccess Function Screen SuperimposeArrow to Superim Pose by pressingTo Recall Indication Playback Features Change Speed Activate Quick SkipVariable-Speed Search/ Reverse Motion Playback Quick Rewind a littleRepeat Playback Normal Playback Only Start RewindSelect The Soundtrack Recording Features Engage TV ModeSelect Channel for ViewingLoad a Cassette Select VHS DeckFind Program Start PointPAUSE/RESUME SET Tape SpeedRecording Playback with VHS Navigation Select VHS Navigation Mode Access VHS SET UPSet VHS Navigation Select Program Tered ProgramScan for Beginning of Pro- gram with VHS Navigation Activate FRAME-BY Activate HIGH-SPEED SearchChange SLOW-MOTION Speed Start Search Access Distant CodeIndex Search Tuned-in channel or AUXiliary mode Operation modeSwitchable to the tape remaining time display Press OSDTracking Mode Adjust ManualEngage Manual TrackingCounter Reset Tape Position IndicatorPress C.RESET Beginning or E End shows you Where you are on the tapeSelect Picture Control Mode Access VHS SET UP 1 ScreenPicture Control Select Video Stabilizer Mode Access VHS SET UP ScreenVideo Stabilizer Select TBC Mode TBC byPressing Arrow to %fi ∞, then press OKCalibration Mode At the top of the HDD/VHS SET UPActive Video Calibration Calibration byRecording Display Counter Information Display Tape Remaining TimeExit the Display Display Elapsed Recording TimeVHS Super VHS, S-VHS ET and VHS Engage S-VHS ET Mode Super VHS ETLocate Start Point Engage RECORD-PAUSE ModeResume Recording To Record Stereo Programs Stereo And SAP Second Audio ProgramTo Listen To Stereo Soundtrack During Recording VCR Plus+ Timer Programming Check Program Data Changing VCR Plus+ Setting Access Initial SETInitial SET UP by VCR Plus+ Guide Channel MatchingAccess Guide Channel SET Screen Input Receiving ChannelExpress Timer Programming Recorded onSET Program Date SET Program Stop TimeSET Weekly or Daily SET Channel NumberSET Category Check Overlap Program Return to the NormalSTOP+/-,DATE+ CH+VHS Deck only Check, Cancel And Revise ProgramsCH+ Select Auto SP=EP Timer Mode Auto SP→EP TimerTimer Recording Prepare the External Equipment for Timer RecordingEngage REC Link Mode To cancel REC Link mode, press REC Link againInstant Timer Recording ITR Engage ITR ModeSET Recording DurationAbout Hybrid Navigation About Registration of InformationAbout Editing of Programs Limitations of RegistrationAccess Modify Screen Modify InformationSelect Deck Register NEW IndexAccess Navigation Screen Enter NEW TitleRegister NEW Title Modify Program TitleSelect NEW Category Register NEW CategoryModify Category Press @%#fi or 253∞ to move the arrow toAccess Delete Screen Confirm DeletionDelete Information For HDD NavigationAccess Easy Dubbing DubbingNavigation Screen Select Dubbing OptionSelect REC Speed Start DubbingDubbing Normal DubbingEND Dubbing Press Pause on the remote control. To resume Remote controlDard at the VHS SET UP 1 of the main Menu Press VHS or S-VHS and select the program to beRandom Assemble Editing Program Editing Memory 1 program x 8 scenesSelect the Other EDIT-IN and EDIT-OUT Points Prepare VHS Deck forRecording Start EditingEdit From a CamcorderReturn to Normal Screen Start PlayerStart Recorder For HDD deckMake Connections Edit To Or From AnotherLoad Cassettes SET RECORDER’S Input Mode Select Edit for PICStart Player Start RecorderSET Input Mode Audio DubbingEngage Audio Dubbing VHS Audio DubbingWhen monitoring the sound during Audio Dubbing, END Audio DubbingSET Remote Control TV Multi-Brand Remote ControlTurn on the TV SET TV Brand CodeOperate Cable BOX Cable Box Multi-Brand Remote ControlHDD or VHS or S-VHS DBS Receiver Multi-Brand Remote Control Turn on the DBSReceiver Enter DBS Receiver Brand SET Remote Control Code Enter Remote Control Code Confirm the Setting Ex. When pressingCassette gets stuck partway Playback won’t startHDD deck Recording won’t startTimer again Protection switch to RECRemove the cassette and cover Procedure  pg Re-perform the VCR Plus+ setupPlus+ system doesn’t work properly Can the VCR indefinitely remain in the Record-Pause mode? Can the VCR indefinitely remain in the still mode?What happens if the tape runs out during recording? # $ #1 and ¡ Buttons  pg $S-VHS ET Button  pg12ANTENNA in Connector  pg REAR1VIEWDisplay Panel 8Space Button  pg Cancel Button  pg ControlList Of Terms Monochrome signal, 525 lines NTSC-type colour signal and EIA20C to 60C -4F to 140F EN for Servicing Only in U.S.A Warranty Only in U.S.A EN Memo Memo HM-HDS1U
Related manuals
Manual 100 pages 29.12 Kb
Top Page Image Contents