EAW DSA250i, DSA230i owner manual DSAi Connections

Page 42

8.6 DSAi CONNECTIONS

This appendix discusses the operation of the DSA's communications system, some additional connection configurations, and why things go wrong if not connected properly.

8.6.1 BACKGROUND

Phoenix Audio Connectors: The two balanced Phoenix audio connectors are for standard, line level, analog audio signals. This analog audio is converted to digital in each DSAi unit. The audio connections to the Link Port connectors are made by the firmware.

CobraNet Audio: The DSAi implements CobraNet Audio using the multicast bundles 1-255. The communication is implemented using the serial bridge feature. All communications sent through CobraNet is received by all other CobraNet cards on the network. The digital audio from the optional CM-1 CobraNet card is connected to a digital input within the module. Because there is no digital to analog conversion, there is no audio signal at the Link Ports.

EIA-485 port: This Phoenix connector is for control data sent over an EIA-485 bus from the computer. It provides a 115200 bps, dc-isolated connection with a selectable 120 ohm termination. This connector is directly wired internally to the Link Port connectors and, via an option in DSAPilot, to the CobraNet port.

CobraNet Slot with CM-1 Card: The DSAi communicates over the CobraNet card using the serial bridge interface. All audio and control data sent over the serial bridge is received by all other CobraNet devices on the network. Control data communicated over EIA-485 can be connected, via an option in DSAPilot, to the CobraNet Slot.

Link Ports: The link ports carry balanced audio from the Phoenix Audio connectors as well as control data from the Phoenix EIA-485 connectors and CobraNet card, if installed. These connections are made by the firmware.

8.6.2 DSAPILOT COMMUNICATIONS

Each DSAi module has four ports through which it can communicate with DSAPilot:

-EIA-485

-CobraNet Card Slot

(requires the optional CobraNet CM-1 Card)

-Signal End Link Port (SLink) in the end cap with the LED

-Power End Link Port (PLink) in the opposite end cap

Each DSAi module has a unique address, even if it is one of two or more in a multiple module DSAi cluster. In DSAPilot, individual module addresses in a cluster are grouped so that the cluster appears as one larger loudspeaker to the user. Behind the user interface, the communication is with either individual module addresses or a global address, to which all modules and clusters in a system respond. An example of the latter is setting the LED Functions.

38

Image 42
Contents Page Safety Precautions Read this First Precauciones DE Seguridad LEA Esto Primero EC Declaration of Conformity Contents Page Unpacking ContentsIntroduction Shipping DamageReturning Products to EAW Audio Signal ConnectionChapter Quick StartDaisy Chaining Audio and Computer Signal Between Modules AC Mains InstallationComputer Control Connection Physical Installation Signal End / Power EndSignal Processing DescriptionSystem Overview Features 4 DSAi Block DiagramsElectronic Applications Engineering Design4a Angled Radiation Pattern Comparison to Traditional Products DSAPilotLow Frequency Performance Designing DSAi SystemsInstallation Analog Audio and EIA-485 Computer Control2 Audio a & Audio B Recommended Conductor Gauge AWG to 18 AWG / 0.2 mm to 1 mm 3 Basic CobraNet Diagram CobraNet Audio and Computer ControlCabling Fault Detect Supervisory Monitoring 3a Single DSAi Fault on AC Mains Power Connection 2 PowerCon PlugGrounding 4 Fuse2 Signal End / Power End 3 DSAi Cluster Configurations 4a Wall Mounted 6 Mounting Height Lift the enclosure onto the structure-mounted Wall Brackets Acoustical Installation Initial Set-UpOperation Operational FunctionsSignal Monitoring Operational Check List Normal OperationOperational ‘DOS’ and ‘DONTS’ Service Items Maintenance and ServiceWarranty How to Contact EAWInspections and Maintenance AppendicesTroubleshooting DSA250i OnlyEIA-485 EIA-485 Network Notes CobraNetSupport For Ethernet Support For CobraNetDSAi Connections 3a EIA-485 Example 5c Example One path was to the EIA-485 port. So when B responds 6c Example Mechanical Drawings Right Side BackRight Side Full Scale Wall Bracket