Friedrich PTAC - R410A service manual Accessories

ACCESSORIES

NEW CONSTRUCTION ACCESSORIES

PDXWS	WALL SLEEVE Galvanized zinc coated steel is prepared in an 11-step
	oven for exceptional durability. The wall sleeve is insulated for sound
		PDXWS
PDXWSEXT	DEEP WALL SLEEVE EXTENSION For use when the wall is thicker
	than 13 1/4”deep. The wall sleeve may be special ordered through your
	-
	ments..
		PDXWSEXT
PXGA	GRILLE Standard, stamped aluminium, anodized to resist chalking and
	oxidation.
PXAA	ARCHITECTURAL GRILLES Consist of heavy-gauge 6063-T5 alumi-
	num alloy:
PXBG		PXGA
	PXAA – Clear, extruded aluminum
PXSC
	PXBG – Beige acrylic enamel
	PXSC – Also available in custom colors.
		PXAA
PXDR10	CONDENSATE DRAIN KIT Attaches to the bottom of the wall sleeve for
	-
	nal draining. Recommended on all units to remove excess condensate.
	Packaged in quantities of ten.
PXSB	DECORATIVE SUBBASE Provides unit support for walls less than
	-
	ing brackets for electrical accessories. Accepts circuit breaker, power
	disconnect switch, or conduit kit.
RT6	DIGITAL REMOTE WALL THERMOSTAT Single stage cool, single
	stage heat for PDE models or single stage cool, dual stage heat for
	PDH model thermostat features high/low fan speed switch. Thermostat
	is hard wired and can be battery powered or unit powered. Features
	Friedrich PTACs and Vert-I-Paks.
PDXRTA	REMOTE THERMOSTAT ESCUTCHEON KIT This kit contains ten
	escutcheons that can be placed over the factory control buttons when
	a remote wall mounted thermostat is used. The escutcheon directs the
	guest to the wall thermostat for operation and retains the LED window to
	display error codes and diagnostic information.
PXSE	SLEEVE EXTENSION RETROFIT KIT Galvanized zinc coated steel,
	2.4" sleeve extension attached to the room side of the sleeve to allow for
	the installation of a PD-Series Friedrich PTAC in a T-Series sleeve.
PDXDAA	LATERAL DUCT ADAPTER Attaches to the PTAC/PTHP unit and
	provides a transition to direct up to 35% of the total CFM to a second-
	ary room, either left or right of the unit. Kit includes duct plenum with
PDXDEA	LATERAL DUCT EXTENSION A three-foot insulated plenum that at-
	taches to the left or right side of the duct adapter. The extension can be
	cut to length by the installer. Maximum allowable straight extension is 15
	feet.

8