Accessories

C-1	ACCESSORIES	C-1

OPTIONAL FEATuRES (Field Installed)

GENERAL OPTIONS

WARNING

Pipe Thawing with an arc welder can cause fire, explosion, damage to electric wiring or to the arc welder if done improperly. The use of an arc welder for pipe thawing is not approved by the CSA, nor is it recommended or supported by Lincoln Electric.

------------------------------------------------------------------------

Power Plug Kit K802D

A power plug kit for the auxiliary power receptacles is available. (Provides a plug for each receptacle.)

Spark Arrestor Kit K903-1

Includes a heavy gage steel, approved spark arrestor, clamp and adapter for mounting to the muffler exhaust pipe.

TRAILER K2636-1

For heavy-duty road, off-road, plant and yard use. Includes pivoting jack stand, safety chains, and 13 in. (330.2 mm) wheels. Stiff .120 in. (3.0 mm) welded rec- tangular steel tube frame construction is phosphate etched and powder coat painted for superior rust and corrosion resistance. Low sway suspension gives out- standing stability with manageable tongue weight.Wheel bearings are packed with high viscosity, high pressure, low washout Lubriplate® grease.

Includes a Duo-Hitch™– a 2 in. (50.8 mm) Ball/Lunette

Eye combination hitch. Overall width: 60 in. (1.5 m)

K2639-1 Fender & Light Kit

K2640-1 Cable Rack

Stainless Steel Sheet Metal Kit K2423-1

Stainless steel roof and doors. Also includes decals (mounted), door latches, door hooks, bumpers and all- required mounting hardware. Fits K6090-9 and -10 Pipeliner® 200D and K1643-1 thru -10 Classic® 300D

STICK OPTIONS

ACCESSORY SET K704

Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, headshield, work clamp and elec- trode holder. Cable is rated at 500 amps, 60% duty cycle.

Remote Control Kit K924-4

Contains remote control rheostat and 100 ft. (30.5 m) cable for adjusting the OCV at the welding site.

TIG OPTIONS

TIG Module K930-2

Provides high frequency and shielding gas control for AC and DC GTAW (TIG) welding applications. Its compact case is designed for easy carrying, complete with a handle. High frequency bypass is built in. Additionally, the K936-3 control cable is required if remote control is used. If remote control is not used the K936-4 control cable is required.

PTA-26V TIG Torch K1783-9

Air cooled 200 amp torch equipped with valve for gas flow control. 25Ft. length.

Magnum Parts Kit For PTA-26V TIG Torch KP509

Control Cable K936-4 (required for TIG Module) Control cable for connecting the K930-2 TIG Module.

Arc Start Switch K814 (required for TIG Module) Comes with a 25ft.(7.6m) cable.

Attaches to the TIG torch for convenient finger control.

Contactor Kit K938-1 (required for TIG Module) Provide “Cold” tungsten Tip when welding with the TIG Module.

Control Cable Extension K937-45

Allows the TIG Module to be operated at distances up to 200 ft. from the power source.Available in 45 ft. (13.7m).

SAE-300®