Lincoln Electric SAE-300 manual Contact your local Lincoln, Authorized Field Service Facility

Page 27

E-5		TROubLEShOOTING	E-5

		Observe all Safety Guidelines detailed throughout this manual

PRObLEMS

(SYMPTOMS)

POSSIbLE

CAuSE

RECOMMENDED

COuRSE OF ACTION

Engine does not start.	1.	Lack of fuel.
	2.	Air mixed in the fuel system.
	3.	Clogged fuel filter.
	4.	Irregular and faulty fuel supply
		(Injector pump trouble).
	5.	Glow plug not heated.
	6.	Clogged air cleaner.
	7.	No compression.
	8.	Engine protection light is ON.

Engine does not turn over.	1.	Faulty Ignition switch and or
		Injector pump solenoid.
	2.	Insufficient charging or com-
		plete discharge of the battery.
			If all recommended possible areas
	3.	Improper viscosity of the lubri-	of misadjustment have been
		cating oil.	checked and the problem persists,
			Contact your local Lincoln
			Contact your local Lincoln
Irregular running of the engine.	1.	Air mixed in the fuel system.	Authorized Field Service Facility.
	2.	Uneven fuel injection (Faulty
		fuel injector pump).
	3.	Clogged fuel filter.
	4.	Defective governor.
	5.	Engine itself defective.

Engine stops during operation and	1.	Lack of fuel in the fuel tank.
the Engine Protection light does
not turn on.	2.	Clogged fuel filter.
	3.	Air mixed in the fuel system.
	4.	Faulty function of the engine.

CAuTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

SAE-300®

Image 27

Contents SAE-300 California Proposition 65 Warnings SafetyElectric ShOCK can kill ARC Rays can burnFuMES and Gases can be dangerous Welding and CuTTING Sparks can Cause fire or explosion Cylinder may explode if damagedIii Sûreté Pour Soudage a L’Arc PRÉCAuTIONS DE SûretéOn-Line Product Registration Please Examine Carton and Equipment For Damage ImmediatelyTAbLE of Contents Volts @ Rated Amps Cycle InstallationTEChNICAL Specifications SAE-300 DescriptionDesign FEATuRES General DescriptionReceptacle MAChINE GROuNDING PRE-OPERATION InstallationTrailer see Optional FEATuRES Location / VentilationPRE-OPERATION Service OILCooling System To prevent Electrical Damage when 5INSTALLATIONA-5BATTERY ChARGING To prevent ExPLOSION whenCold WEAThER Starting OperationENGINE OPERATION Starting ThE SAE-300 404D-22 Diesel EngineWelder Operation Engine bREAK-INStick / TIG Welding Idler Operation MIG WeldingOptional FEATuRES Field Installed AccessoriesWire Feeder Options Cooling System MaintenanceSafety PRECAuTIONS General INSTRuCTIONSVent Screw Priming Lever Idler MaintenanceNameplates PuRGING AIR from FuEL System Perkins 404D-22 EngineMaintenance PROCEDuRE Gfci Testing and ResettingHOW to uSE TROubLEShOOTING GuIDE TROubLEShOOTINGRecommended PRObLEMSSymptoms POSSIbLE CAuSEYour local Lincoln Authorized POSSIbLE Areas of MISADJuSTMENTSSOpen Closed Electronic Idler TROubLEShOOTING GuIDEDefective -- Will Not Close Auxiliary Power Load is Turned onContact your local Lincoln Authorized Field Service FacilityWater passage. Flush the system Ing on Faulty light wiring Diagrams S10766-14 Atenção Atenção