Lincoln Electric IM845-A Single Head Feeder, Single Head Boom Feeder, Configuring the System

Page 13

A-6	INSTALLATION	A-6

CONFIGURING THE SYSTEM

The power source will “Auto Map” the system eliminat- ing most of the need to set DIP switches to configure the system.

If a system can not be “Auto Mapped” then the status light on the power source will blink green fast and the welder output will be disabled.

If a system is not “Auto-mappable”, then consult the instruction manual for the accessory being used for configuration information about DIP switch settings, or consult your local Lincoln sales representative.

SINGLE HEAD FEEDER

DUAL HEAD FEEDER

UP TO 4 WIRE FEEDERS

ALLOWED

POWER WAVE		POWER WAVE
355M		355M

CONTROL BOX

FEED HEAD

SINGLE HEAD BOOM FEEDER

UP TO 4 FEED HEADS

ALLOWED

POWER WAVE

355M

FEED HEAD 1

SINGLE HEAD BOOM FEEDER

	POWER WAVE 355M
ROBOT
ROBOT
PLC CONTROLLER		WIRE
ANALOG INTERFACE		DRIVE
		MODULE

PF-10R

etc.

POWER WAVE 355M

Image 13

Contents Power Wave 355M California Proposition 65 Warnings SafetyElectric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosionSûreté Pour Soudage a LʼArc Précautions DE SûretéThank You Table of Contents Technical Specifications Power Wave 355M InstallationSelect Suitable Location Safety PrecautionsCable INDUCTANCE, and ITS Effects on Pulse Welding Output CABLES, Connections and LimitationsNegative Electrode Polarity Work Voltage Sensing Voltage SensingSystem Description UP to 4 Wire Feeders Allowed Configuring the SystemSingle Head Feeder Single Head Boom FeederCombination Hard Automation Application Installation Alternate Hard Automatic ApplicationControl Cable Specifications Welding with Multiple Power WavesTWO Power Waves Installation DIP Switch Settings and Locations Receptacle SpecificationsSwitch Work sense lead Auto mappingGeneral Description OperationRecommended Processes and Equipment Recommended ProcessesLimitations Required EquipmentDuty Cycle and Time Period Case Front ControlsFringe Procedures Nominal ProceduresWelding Adjustments Making a WeldSynergic CV Constant Voltage WeldingNon Synergic CV All CV ModesPULSE-ON-PULSE GMAW-PP Pulse WeldingTIG Gtaw Benefits of Pulse on Pulse from Lincoln ElectricSmaw ARC GougingRecommended Welding Procedures for Power Mode Table B.3 Power ModeFactory Installed AccessoriesField Installed Optional EquipmentCapacitor Discharge Procedure MaintenanceAlways wear a face shield and long sleeves when servicing For all four capacitorsHOW to USE Troubleshooting Guide TroubleshootingError code before the machine is turned off Using the Status LED toError Code # Indication Error Codes for the PowerwaveAuthorized Field Service Facility Troubleshooting GuideContact your local Lincoln Problems Possible Areas Recommended Symptoms Contact your local Lincoln Authorized Field Service Facility Troubleshooting Wiring Diagrams Diagrams Connection Diagram Semi-automatic Simple System Connection DiagramDimension Print Power Wave 355M Power Wave 355M Precaucion Warnung