Installing miter gauge
Insert the wooden gauge into the miter gauge and tighten the two screws lightly but firmly. The wooden gauge will be used later to help you accurately make cross- cuts.
Place the miter gauge on the sliding table with the wooden gauge extending toward the fixed table. Insert the longer miter gauge installation screw through the hole
(A)in the miter gauge and screw it into the threaded hole in the sliding table. Insert the shorter miter gauge installation screw through the hole (B) and screw it into the nut in the sliding table. Loosen the wing bolt securing the sliding table before mov- ing the sliding table.
Installing or removing saw blade
Hold the outer flange with the offset wrench and loosen the hex nut clockwise with the wrench (the hex nut has left hand thread). Then remove the outer flange and flange.
8