GR0UNDING INSTRUCTIONS
ALL GROUNDED, CORD-CONNECTED TOOLS: In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current t o reduce the risk of electric shock. This tool is equipped with an electric cord hav- ing an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accord- ance with all local codes and ordinances.
Do not modify the plug provided-if it will not fit the outlet, have the proper out- let installed by a qualified electrician.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor t o a live terminal.
Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as t o whether the tool is properly grounded.
This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Figure A. The tool has a grounding plug that looks like the plug illustrated in Figure A. A temporary adapter, which looks like the adapter illus- trated in Figure B and C, may be used t o connect this plug t o a 2-pole receptacle as shown in Figure B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green-colored rigid ear, lug, etc. extending from the adapter must be connected t o a permanent ground such as a properly grounded outlet box.
GROUNDING METHODS
FIG. A | FIG. B | FIG. C |
| | Adaoter |
QI | Cover of Grounded - | 9' |
Outlet Box |
Grounding Pin | | Grounding |
| | Means |