Adjusting miter angle
Loosen the miter gauge installation screws and adjust the miter gauge to the desired angle (0to 45 degrees). Then tighten the miter gauge installation screws securely.
CAUTION :
After adjusting the miter angle, be sure to tighten the miter gauge installation screws securely.
Switch action
To start the tool, press the "ON" button while the key is pressed in. Press the"0FF" button to stop.
When operating the key and switch buttons, it is convenient to view them through the window area in the fixed table.
CAUTION :
When not using the tool, remove the key and store it in a secure place. This prevents unauthorized operation.
16