Hand tool storage pocket
The table saw comes with a hand tool storage pocket in the base. Keep wrenches, screwdriver, etc. in this pocket.
I1
Adjusting depth of cut
The depth of cut may be adjusted by turn- ing the knob. Turn the knob clockwise to raise the blade or counterclockwise to lower it. The depth of cut is indicated on the scale by the pointer (A).
If the knob does not turn easily, loosen the two adjusting screws on the inside of the table saw counterclockwise. If the knob is loose enough to be turned by vibration, tighten the adjusting screws clockwise.
14