Movement and transport of table saw
Before moving the table saw, tighten the wing bolt to secure the sliding table.
When moving the table saw, hold it by the fixed table and the bars.
Be sure to use two persons to lift and move it. When transporting the table saw by vehicle, secure it with a rope or other sub- stantial means.
ASSEMBLY
The table saw is shipped from the factory with the ruler guides, miter gauge, saw blade, rip fence, blade guard and table insert not installed. Assemble as follows.
CAUTION :
Always be sure that the tool is switched off and unpluggedbefore assembly.
Installing ruler guides | Sliding fable | Fixed fable |
Install the graduated ruler guide on the front side of the fixed table and the non- graduated one on the rear side. Use the hex wrench to tighten the bolts.
7