GM 2000 EAC - EN
1.5CE Conformity
1.5.1Short explanation
CE = Communauté Européenne:
Products identified with the CE mark have been manufactured and checked according to EU guidelines. This means that, in terms of materials used, manufacturing process and operation, they are in accordance with the EU safety and health requirements and therefore the EU regulations and standards. The regulations and standards applying to a particular product can be found in the CE Certificate of Conformity. This is enclosed with the product or can be requested from the manufacturer. The CE identification has been compulsory in Europe since 1st January 1995, and only products bearing CE identification may be released into circulation.
EMC test:
The electromagnetic compatibility test forms an integral part of the CE conformity. EMC tested products are built such that their interference radiation does not influence other devices within the stipulated limits (noise on the radio, etc.). The EMC standard differentiates between use in domestic, business and commercial or industrial areas. Moreover, if required for comfort or safety reasons, products can be EMC tested for their interference immunity. This means they are protected from the influence of external interference.
1.5.2EC Certificate of Conformity The certificate with the Part No.:
0179 780
is enclosed with this product. This can be reordered from your WAGNER representa- tive, quoting the product and serial number.
1.6