GM 2000 EAC - EN
2.3.2AirCoat round jet process
In the AirCoat process, high pressure of 30 to 150 bar is used to atomize the material. The AirCoat air at 0 to 2.5 bar produces a soft jet, which largely eliminates the problem of overlapping boundaries. The spray jet can be adjusted by turning the nozzle nut. The
Advantages of AirCoat
●High painting capacity
●Low fogging tendency
●Good finish
●High- viscosity paints can easily be applied
Nozzle nut
AirCoat air
Material
AirCoat air
2.3.3AirCoat flat jet process
In the AirCoat process, high pressure of 30 to 150 bar is used to atomize the material. The AirCoat air at 0 to 2.5 bar produces a soft jet, which largely eliminates the problem of overlapping boundaries.
Advantages of AirCoat
●High painting capacity
●Low fogging tendency
●Good finish
●High- viscosity paints can easily be applied
AirCoat air
Material
AirCoat air
2.3