Wagner SprayTech GM 2000 EACF, GM 2000 EACR manual Important notes on product liability

Page 9

GM 2000 EAC - EN

1.4Product liability and guarantee

Important notes on product liability

As a result of an EC regulation being effective as from January 1, 1990, the manu- facturer shall only be liable for his product if all parts come from him or are releas- ed by him, and if the devices are properly mounted and operated.

If the user applies outside accessories and spare parts, the manufacturer's liability can fully or partially be inapplicable.

Only the usage of original WAGNER accessories and spare parts guarantees that all safety regulations are observed.

Warranty

12 months / 6 months for multi-shift operation

This equipment is covered by the following manufacturing warranty:

All parts which prove unusable or the use of which is seriously impaired within 12 months or 6 months of receipt by the purchaser due to circumstances predating receipt, such as faulty design, defective materials or poor workmanship, shall be repaired or replaced at our discretion and free of charge.

No liability is assumed for damage attributable to the following factors:

Inappropriate or incorrect use, faulty installation or start-up by the purchaser or third parties, natural wear and tear, as well as wear parts (marked * in the list of spare parts), incorrect handling or maintenance.

The equipment must be checked immediately upon receipt. Obvious defects must be reported to the supplier or to us in writing within 14 days of receipt in order to avoid losing the right of complaint.

We reserve the right to assign warranty performances to a contractual partner.

Warranty performances shall only be rendered if the purchaser returns the warranty card bearing the date of sale and seller's signature together with the equipment. The repair costs will be charged to the purchaser if it is found that the warranty does not apply.

1.5

Image 9
Contents Operating Manual Page GM 2000 EAC EN ContentsSpare Parts Catalogue Introduction Using the manualSafety Safety RegulationsSafety information on harmless electrostatic discharges Accessories and spare partsProtective breathing masks EarthingPTB Conformity certification Months / 6 months for multi-shift operation Important notes on product liability0179 CE ConformityShort explanation CE = Communauté Européenne EMC testTechnical data DescriptionFunctional description Activated and material valve open AirCoat round jet process Electrostatic effect What kind of spraying material can be applied?Preparation of paint Preparation Before Starting WorkEarthing Imperfect earthing of a workpiece will resultEmpty Starting WORK, and Handling Adjusting round jet fanPreparation For flat jet processCleaning of clogged round jet tips Exchange of Aircoat round jet tip insert EAC roundChanging from AirCoat round jet to AirCoat flat jet Cleaning of AirCoat flat jet tips Replacing AirCoat flat jet tipsClogging of AirCoat flat jet tips Empty Decommissioning and cleaning MaintenanceIf the round jet nozzle is fitted If the flat jet nozzle is fittedExchange or cleaning of filters Dissassembly of AirCoat nozzle body round jetExchange of complete valve rod, or of valve rod seals Adjustment of the valve rod sealExchange of paint channel Problem Cause Solution Trouble Shooting and SolutionsEmpty Accessories Part-No Marking Volume flow Jet width Recommended filterRound jet tip inserts AirCoat flat tips Hoses and fittings Long filter housing and and filtersSpecial tools DescriptionEmpty Special marks in spare parts lists How to order spare parts?Spare Parts Catalogue Part No., description and quantityQuantity Description Spare parts listGM 2000 EAC EN Empty Page Deutschland / Germany England / United KingdomSchweiz / Switzerland CH- 9450 Altstätten