Wagner SprayTech GM 2000 EACR, GM 2000 EACF manual AirCoat flat tips

GM 2000 EAC - EN

7.2	AirCoat flat tips
	AirCoat flat jet tips are used for fast, economic application of material to
	flat workpieces.
	Part	Marking	size	Spraying	Volume	Jet	Recommended
	number		mm / inch	angle	flow 1)	width 2)	filter
	0128 564	07.40	0.18-0.007	40	0.19	160
	0128 550	09.10	0.23-0.009	10	0.26	90
	0128 216	09.20	0.23-0.009	20	0.26	120
	0128 567	09.40	0.23-0.009	40	0.26	170
	0128 211	09.50	0.23-0.009	50	0.26	200	180 mesh
	0128 551	09.60	0.23-0.009	60	0.26	220
	0128 552	11.10	0.28-0.011	10	0.38	100
	0128 217	11.20	0.28-0.011	20	0.38	125
	0128 568	11.40	0.28-0.011	40	0.38	190
	0128 201	11.50	0.28-0.011	50	0.38	210
	0128 573	11.60	0.28-0.011	60	0.38	235
	0128 553	11.80	0.28-0.011	80	0.38	290
	0128 554	13.10	0.33-0.013	10	0.57	100
	0128 218	13.20	0.33-0.013	20	0.57	120
	0128 569	13.40	0.33-0.013	40	0.57	200
	0128 212	13.50	0.33-0.013	50	0.57	220
	0128 574	13.60	0.33-0.013	60	0.57	250
	0128 555	13.80	0.33-0.013	80	0.57	310	100 mesh
	0128 556	15.10	0.38-0.015	10	0.72	115
	0128 219	15.20	0.38-0.015	20	0.72	145
	0128 570	15.40	0.38-0.015	40	0.72	210
	0128 213	15.50	0.38-0.015	50	0.72	250
	0128 575	15.60	0.38-0.015	60	0.72	270
	0128 557	15.80	0.38-0.015	80	0.72	330
	0128 220	18.20	0.46-0.018	20	1.14	140
	0128 571	18.40	0.46-0.018	40	1.14	250
	0128 215	18.50	0.46-0.018	50	1.14	270
	0128 558	18.80	0.46-0.018	80	1.14	380
	0128 565	21.20	0.53-0.021	20	1.56	190
	0128 572	21.40	0.53-0.021	40	1.56	270	50 mesh
	0128 559	21.50	0.53-0.021	50	1.56	290
	0128 560	21.80	0.53-0.021	80	1.56	430
	0128 561	26.50	0.66-0.026	50	2.32	300
	0128 562	31.50	0.79-0.031	50	3.50	300
	0128 563	36.50	0.91-0.036	50	4.56	300

1)Volume flow in l/min water at 100 bar

2)Jet width in mm at a distance of 30 cm from the object and at a pressure of 100 bar, synthetic resin paint, 20 DIN seconds

7.2