Installation
Installation Precautions
WARNING: Fire or explosion hazard
This equipment is not ignition protected and employs components that tend to produce arcs or sparks. To reduce the risk of fire or explosions, do not install in compartments containing batteries or flammable materials or areas in which
WARNING: Shock hazard and equipment failure
To reduce the risk of electric shock and prevent premature failure due to corrosion, do not mount where exposed to rain or spray.
WARNING: Fire hazard
To prevent fire, do not obstruct ventilation openings. Do not mount in a zero clearance
WARNING: Shock hazard
For continued protection against risk of electric shock use only the residual current circuit breaker (RCCB) type receptacles. Other types may fail to operate properly when connected to this inverter, resulting in a potential shock hazard.
WARNING: Shock hazard
Both AC and DC voltage sources are teminated inside this equipment.
Each circuit must be individually opened before servicing. When a solar array is exposed to light it supplies DC voltage to the battery and this equipment.
WARNING: Shock hazard
Do not remove
Important: The output of this device is not sinusoidal. It has a maximum total harmonic distortion of 47% and a maximum single harmonic of 34%.
Application Information The Freedom 10 is provided with integral electronic protection against AC and DC overloads.
Appropriate Applications
The Freedom 10 is appropriate for installation in recreational vehicle (RV), residential solar installations, and marine applications. The installation instructions for each application will be discussed separately. Refer to the separate installation guide for typical installation examples.