Xantrex Technology owner manual Freedom 10 Power Switch, Remote Control Panel, Models

Operation

Freedom 10 Power Switch

The power switch is located on the front panel of the Freedom 10. This switch controls ON/OFF and RESET for the inverter. Expect a 3-second delay when the power switch is turned ON before the unit is activated.

If installed with the remote control panel, the power switch on the unit itself should be left in the OFF position.

If the unit is connected to external AC power, the power switch may be turned off, but the battery charger will continue to function. The internal transfer switch will continue to be engaged with the switch off and AC power will be available at the output of the unit. If AC power is removed, the unit will not come on as an inverter.

Figure 3-1Freedom 10 Power Switch

Important: The power switch controls the inverter function. Placing the switch in the OFF position disables the inverter and connects mains to the output.

Remote Control Panel

12 V Models

The remote control panel provides LED bar graphs that show system status, battery voltage, and current in both inverter and charge modes. For more information about this remote, refer to its owner’s manual.

Figure 3-2Remote Control Panel For 12 V Models

3–2 975-0251-01-01