Technical data | Studer Innotec XTH 6000-48, XTH 8000-48 instruction

Xtender

18 Technical data

Rated battery voltage	12 V		24 V	48 V	48 V
Input voltage range	9.5 - 17 V		19 - 34 V	38 - 68 V	39 - 68 V
Continuous power @ 25 °C	2500 VA		4500 VA	5000 VA	7,000 VA
Smart boost power	3000VA		5000 VA	6000 VA	8000 VA
30 minute load @ 25 °C	3000 VA		5000 VA	6000 VA	8000 VA
5 second load @ 25 °C			3 x Pcont
Maximum load			Up to short-circuit
Maximum asymmetrical load			Up to Pnom
Load detection (standby)			2 to 25 W
Admissible cos phi			0.1 – 1
Maximum efficiency	93%		94%	96%	96%
Open-circuit power OFF/standby/ON	1.3W/2.2W/14W		1.8W/2.5W/18W	2.2W/3W/22W	2.2W/3.8W/26 W
Output voltage		Sine wave 230 Vac (+/-2%) / 180-245 Vac
Output frequency	50 Hz adjustable 45-65 Hz +/- 0.05% (quartz-controlled)
Harmonic distortion		<2%
Overcharge and short-circuit	Automatic disconnection then 2 startup attempts
Overheating protection	Alarm prior to disconnection and automatic restart
Battery charger
6-phase battery charger	Programmable I-U-Uo-equalisation-Uo(low)-U(periodic)
Adjustable charge current	0 - 160 A		0 - 140 A	0 - 100 A	0 - 120 A
Input current sharing system			1 - 50 A
Maximum input voltage			265 Vac
AC input voltage range	Level of detection adjustable from 150 to 230 Vac
Admissible input frequency			45 - 65 Hz
(PFC)			EN 61000-3-2

Battery control (factory value / adjustable range with RCC-02)

End of absorption	by duration: 2h / 0.25 - 18 h or by current <10A / 2 - 50 A
Absorption voltage	14.4V / 9.5-18	V	28.8V / 19-36 V	57.6V / 38 - 72 V
Periodic absorption voltage	- / 9.5 - 18 V		- / 19 - 36 V	- / 38 - 72 V
Floating voltage	13.6V / 9.5-18	V	27.2V / 19-36 V	54.4V / 38 - 72 V
Reduced maintenance voltage	- / 9.5 - 18 V		- / 19 - 36 V	-- / 38 - 72 V
Equalisation	By number of cycles ( - / - 100) or at fixed intervals ( - / 52 weeks)
End of equalisation	By duration 2h / 0.25 – 10h or by current - / 5 – 50 A
Equalisation voltage	- / 9.5 - 18 V		- / 19-36 V	- / 38 - 72 V
Low voltage disconnection	10.8V / 9.5-18	V	21.6V /19-36 V	43.2V / 38 - 72 V
Reduced floating duration			- / 0 - 32 days
Periodical absorption			- / 0 - 10 hours
Temperature compensation		-5 / 0 to-8 mV/°C/cell (optional BTC-01)
General data
Auxiliary contacts	2 independent contacts 16 A - 250 Vac (potential-free 3 points)
Maximum transfer relay current			50 A
Maximum transfer time			0-15 ms
Weight	34 kg		40 kg	42 kg	46 kg
Dimensions: H x W x D [mm]			230x300x500
Protection degree			IP20
Conformity	EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2,
			Dir. 89/336/EEC, LVD 73/23/EEC
Operating temperature range			-20 to 55 °C
Ventilation			Forced from 45 °C
Noise level	<40 dB / <50 dB (without / with ventilation)
Warranty			2 years
Options
Battery temperature sensor:	BTS-01
Remote control and programming centre for wall mounting: RCC-02
Remote control and programming centre for panel mounting: RCC-03

Installation and operating Instructions

Xtender V1.3

Page 36