DeWalt D2002M instruction manual Electrical Grounding, See Grounding, Instructions under

English

•	Repairs attempted by
	unqualified personnel can
	result in serious injury or
	death by electrocution.
•	Electrical Grounding:
	Failure to provide adequate
	grounding to this product

•	Any electrical wiring or repairs
	required on this product
	should be performed by a
	DeWALT factory service
	center or a DeWALT
	authorized service center in
	accordance with national and
	local electrical codes.
•	Make certain that the
	electrical circuit to which the
	compressor is connected

•Always turn the compressor off and bleed pressure from the air hose and air tank before attempting maintenance, attaching tools or accessories.

WARNING: RISK OF Hot surfaces

What can happen How to prevent it

could result in serious injury

or death from electrocution.

See Grounding

Instructions under

Installation.

provides proper electrical

grounding, correct voltage and

adequate fuse protection.

•Touching exposed metal such as the compressor head, engine head, engine exhaust or outlet tubes, can result in serious burns.

•	Never touch any exposed
	metal parts on compressor
	during or immediately after
	operation. Compressor will
	remain hot for several minutes
	after operation.
•	Do not reach around
	protective shrouds or attempt

WARNING: Risk from Flying Objects

What can happen How to prevent it

maintenance until unit has

been allowed to cool.

•The compressed air stream can cause soft tissue damage to exposed skin and can propel dirt, chips, loose particles, and small objects at high speed, resulting in property damage or personal injury.

•Always wear certified safety equipment: ANSI Z87.1 eye protection (CAN/CSA Z94.3) with side shields when using the compressor.

•Never point any nozzle or sprayer toward any part of the body or at other people or animals.

6