Powermatic DDS-225, DDS-237 manual

18.KEEP THE FLOOR AROUND THE MACHINE CLEAN and free of scrap material, saw dust, oil and other liquids to minimize the danger of tripping or slipping. Be sure the conveyor table is free of all scrap, foreign material and tools before starting sanding operations.

19.Keep visitors a safe distance from the work area. KEEP CHILDREN AWAY.

20.MAKE YOUR WORKSHIP CHILD PROOF with padlocks, master switches or by removing safety keys.

21.Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are careless acts that can result in serious injury.

22.Maintain a balanced stance at all times so that you do not fall or lean against the blade or other moving parts. DO NOT OVERREACH or use excessive force to perform any machine operation.

23.USE THE RIGHT TOOL at the correct speed and feed rate. DO NOT FORCE A TOOL or attachment to do a job for which it was not designed. The right tool will do the job better and safer.

24.USE RECOMMENDED ACCESSORIES; improper accessories may be hazardous.

25.MAINTAIN TOOLS IN TOP CONDITION. Keep tools sharp and clean for safe and best performance. Dull tools increase noise levels and can cause kickbacks and glazed surfaces. Check the condition and adjustment of the tools before making any cuts.

26.Keep hands outside the machine. NEVER reach under the guards to try to clear stock that stops feeding. Do not clear chips and sawdust with hands; use a brush. Do not have any part of the hands under that part of the board that is over the table when starting a cut; the pressure roller will engage the board and force it down against the table causing a pinching action.

27.Do not attempt to sand boards with loose knots or with nails or other foreign material, on its surface. Do not attempt to sand twisted, warped, bowed or “in wind” stock unless one edge has been jointed for guiding purposes prior to sanding.

28.Do not attempt to sand long or wide boards unsupported where spring or weight could cause the board to shift position.

29.If the operator leaves the machine area for any reason, the sander should be turned "off" and come to a complete stop before his departure. In addition, if the operation is complete, he should clean the sander and the work area. NEVER clean the machine with power "on" and never use the hands to clear sawdust and debris; use a brush.

30.TURN OFF THE MACHINE BEFORE CLEANING. Use a brush or compressed air to remove chips or debris — do not use your hands.

31.DO NOT STAND ON THE MACHINE. Serious injury could occur if the machine tips over.

32.NEVER LEAVE THE MACHINE RUNNING UNATTENDED. Turn the power off and do not leave the machine until it comes to a complete stop.

33.Remove loose items and unnecessary work pieces from the area before starting the machine.

34.DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted.

35.DIRECTION OF FEED. Feed work into the drum against the direction of rotation of the drum only.

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may result in serious injury or possibly even death.

DDS-225, DDS-237 specifications

The Powermatic DDS-237 and DDS-225 are two advanced drill presses that have been engineered for woodworkers who demand precision and versatility in their projects. These machines are part of Powermatic’s commitment to providing high-quality tools that cater to both professional and hobbyist woodworkers.

One of the main features of the DDS-237 is its robust construction. With a heavy-duty cast iron base and column, this drill press offers exceptional stability, reducing vibrations during operation which leads to accurate drilling. The DDS-225 follows suit, providing a durable design that ensures reliability even in the most challenging work environments.

The DDS-237 comes equipped with a powerful 1 HP motor, offering variable speed control ranging from 250 to 3000 RPM, allowing users to select the perfect speed for various materials. This feature is particularly advantageous for woodworkers who work with different species of wood or even metal and plastic. The DDS-225, on the other hand, features a slightly less powerful motor but maintains the same level of versatility with multiple speed settings.

Another significant aspect of these drill presses is their user-friendly interface and adjustments. Both models boast an easy-to-read digital depth gauge, enabling precise depth adjustments. This feature is crucial for applications requiring repetitive drilling depths, such as doweling or creating mortises.

Both models also incorporate innovative technologies aimed at enhancing user safety and convenience. The patented Quick-Release chuck system allows for rapid and easy tool changes without the need for additional tools, saving valuable time during setup and operation. Furthermore, the built-in work light illuminates the workspace, improving visibility during intricate drilling tasks.

Dust collection is also a fundamental aspect of both models, with integrated ports designed to minimize debris in the workspace, creating a healthier and cleaner working environment.

The Powermatic DDS-237 and DDS-225 are not just machines but essential tools that combine power, precision, and safety. Whether for professional use or serious woodworking enthusiasts, these drill presses are designed to meet the demands of any project with reliability and efficiency.